| DEPARTMENTS |
|
| Accessories |
|
| Bindings,
trim |
|
| Bodies,
necks, wood |
|
| Books,
plans |
|
| Bridges,
tailpieces |
|
| Electronics,
pickups |
|
| Finishing
supplies |
|
| Fretting
supplies |
|
| Glues,
adhesives |
|
| Hardware,
parts |
|
| Inlay,
pearl |
|
| Kits |
|
| Knobs |
|
| Nuts,
saddles |
|
| Pickguards |
|
| Tools |
|
| Truss
rods |
|
| Tuners |
|
| Video, DVD |
|
|
|
|
Slotted and radiused for low string action
Fender Scale Compound Radius Fingerboard
We've done the critical work for you! These kiln-dried ebony, rosewood and maple fingerboards are accurately slotted for 24 frets and Fender 25-1/2" scale length. The .023"-wide fret slots are ready for our fretwire.
The compound radius surface allows cleaner string bending and lower string action without fret buzz.
See details below
|
|
|
| Item# |
Description |
In stock |
Price |
Quantity |
|
 |
|
|
|
|
|
|
|
|
|
|
Each fingerboard has a flat underside, and is extended to include a 1/8"-wide flat-bottomed nut slot. The width is slightly tapered, and the board is ready for trimming in your shop to fit a variety of neck widths.
Approximate dimensions: 2-3/8" x 20-3/8" x 15/64" (60.32mm x 517.53mm x 5.95mm)
Compound radius: The playing surface radius gradually changes from 10" at the nut, to 13" at the 12th fret, to 14-1/2" at the 22nd fret. We recommend setting your bridge saddles to an overall radius of 16". Learn more about compound radius with this Free Information Compound Radius: Explained.
Fret slots: 24 + 1/8"-wide nut slot
A note about ebony:
Ebony is usually not uniformly black. We offer Black Fingerboard Stain as used by Gibson, Paul Reed Smith and other makers for darkening the streaks on ebony fingerboards, bridges and peghead overlays when desired.
Shown on page 72 of our latest catalog.
Strat®, Tele®, P Bass®, and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation.
|
|
|
|
Details
Pictures
