Stewart-MacDonaldEverything for building and repairing stringed instruments!
Your order cart Your order | Account | Saved list
Sign in
Email
800-848-2273, 9AM-6PM EST, M-F
Home Free catalog Quick order International Customer service

Home : Truss rods : Adjustable truss rods : Slotted Nut Hot Rod Truss Rod

Slotted Nut Hot Rod Truss Rod


Read 10 Reviews   |   Write a Review

Traditional Fender adjustment nut for electric guitars. Smooth two-way action corrects upbow and backbow, giving complete control over the neck.

See details below

Email a friend
Slotted Nut Hot Rod Truss Rod
 
Item# Description In stock Price Quantity
0975 Slotted Nut Hot Rod Truss Rod Yes
$17.67
6 or more $15.61  
12 or more $14.40  


Quantity prices apply to multiples of the same item number Selected currency  
 
 









 Processing...






Related items

Truss Rod Wrench for Fender



Router Bit for Hot Rod Truss Rods



Carbon Fiber Neck Rods



4mm Allen Nut Hot Rod Truss Rod



Hex Nut Hot Rod Truss Rod



Truss Rod Wrench for Fender
Router Bit for Hot Rod Truss Rods
Carbon Fiber Neck Rods
4mm Allen Nut Hot Rod Truss Rod
Hex Nut Hot Rod Truss Rod



Details
 Pictures
Specs
Instructions
Easy to install. The Hot Rod® fits in a straight channel. For proper operation, this truss rod must be installed so that the active rod (the rod with the adjustment nut) is below the passive rod. A wooden filler stick is not required.

Smooth 2-way action with superior strength for stubborn necks. Stainless steel adjustment rod corrects upbow and backbow.

Our Hot Rod neck adjustment system features twin rods in threaded brass collars. The stainless steel active rod turns for smooth neck alignment, with 2-way action. The Hot Rod requires an access cavity for the adjustment nut, and a straight 7/32"-wide x 7/16"-deep slot (measured from the bottom of the fretboard) for installation.

The 18" rod fits many electric guitars. Overall length includes the nut.

We've designed the Router Bit for Hot Rod Truss Rods especially for routing your neck to fit our truss rods.

/\ Top of product page
 Ratings and reviews
Slotted Nut Hot Rod Truss Rod
Slotted Nut Hot Rod Truss Rod
 
4.5 out of 5 stars
Based on 10 ratings Write a Review
Sort reviews by
Displaying 1 – 10
5 3-14-2013
Excellent truss rod!

I have been using these for years in all my necks and have zero issues. They always work perfectly to correct any neck issues. Cellini Custom Guitars.

Eric C.  Las Vegas,Nv. Read my reviews (16)
Customer supplied image for review
4 3-10-2013
Easy installation - prone to rust

I'll start by saying that the truss rod is great but I have installed it on two necks and one of the truss rods picked up rust while the other is showing signs of starting as well. I would only wish that the metal in the knob be of higher quality. Other than that is pretty good.

Gil Solomon  Israel Read my reviews (11)
5 7-06-2012
Truss rod

Excellent item. I'm building my first solid body electric guitar so I'm always looking for items that make the process neat, clean and easy. This was it. Routered out the channel with an easy jig, drilled out a hole for the slotted nut and it fit in nicely. Installed, it worked perfectly. Thanks Stew Mac!

JAT  Canada Read my reviews (7)
4 3-04-2012
Easy Installation. Works very well.

It was easily installed and has worked well on my Strat design. The price is not too bad either. I wish they come in shorter lengths (i.e., 14, 15 inches, etc.) so they can be installed in acoustic and archtop guitars as well as other stringed instruments. One thing to watch for, if your groove is 7/16" deep and you intend to apply some caulk in the groove under the truss rod (to minimize vibration), do not put to much caulk under the rod, otherwise, the truss rod top elevation may end up slightly higher than the groove, and in such case, you may have to file down the rod top ends some to get them leveled with the groove top. I do not use a filler strip and never had a problem with the vibration. I also wish the rod would require a bit shallower groove, i.e., 3/8" deep. It concerns me when the bottom of the groove is just about (or less than) 1/8" from the back of the neck and I do not want to end up with chunky necks. Also, I like to take the least amount of meat possible out of the neck for rod groove routing to maximize the energy transmission and minimize the effects of wood removal on the overall guitar tone. Please see the attached picture for a "safe" installation of the nut. This requires drilling a horizontal hole with the same length and diameter as the nut, install the rod carefully, then glue a small filler strip above the nut. This way, you are very unlikely to crack the groove (therefor, the neck) during the rod installation!

Tarek S.  Plymouth Meeting Read my reviews (3)
Customer supplied image for review
5 2-06-2012
Perfect

love this rod. Easy to install and work's great. This is my preferred choice.

Bryce Didericksen  kansas city, MO Read my reviews (24)
5 1-21-2012
Perfect as always.

I use these truss rods in every guitar i build. They are well constructed, strong and smooth. It doesnt take more than a slight turn to make a big difference.

TisDale Custom Guitars  Renton, WA, USA Read my reviews (52)
Customer supplied image for review
5 3-30-2011
Hot Rods

When I'm feeling lazy and don't want to make a rod from scratch or the application seems to call for a double acting rod, I always choose a Hot Rod from Stew Mac. I've never had a problem with them and they are a snap to install.

Marty  NY state Read my reviews (2)
4 12-28-2010
Not as versatile as the traditional ones

The Hot Rod is not adjustable. You will need to modify some neck designs in order to fit the truss rod. For a 1 piece tele maple neck for example, you'll have to route a longer channel covering the entire length of the heel in order to fit the rod. The channel will have to go further towards the head as well, altering the design.

If covering with a fingerboard, the alterations aren't esthetically noticeable. Otherwise, the Hot Rod is pretty well built and installs easily on a straight channel. It also requires less maintenance than a single action. Just make sure it fits your project's specs and you're good to go!

Tony S.  Paris, France Read my reviews (7)
5 8-15-2010
Good truss rods.

These Hot Rod two-way truss rods work just fine. They're easy enough to install. The screw is a bit offset from center, and can be hard to get in the hole when installing the rod. I've cracked one neck this way. However, if you're careful, it's straightforward. They work great.

Jeremy Dumoit  Richmond, TX
3 6-11-2010
Not so good

Not what I expected. Please look carefully before you purchase. These are not like other truss rods.

K Armand  Mahomet Read my reviews (2)
Displaying 1 – 10 /\ Top of Reviews


Shown on page 72 of our latest catalog.


Hot Rod® is a registered trademark of Stewart-MacDonald Manufacturing Company, Inc.
Select your items, then click ADD to order

To add items to your order, select the check box next to the item you want. You can edit the quantity you wish to purchase here, or in Your Order.

Select your items, then click Save for later

To add items to your saved list, select the check boxes next to the items you want. You can edit the quantity you wish to save here, or in your Saved List.


Toll-free order line:   800-848-2273   9am-6pm Eastern Time, M-F



Your order | Your account | Trade Secrets E-mail Newsletter
Home | Free catalog | Catalog Quick Order | International | Customer service
Our guarantee | Shipping | Security & Privacy | Contact us
Site map | About Us | Employment
© Copyright 2014 Stewart-MacDonald
Your shopping is secure with VeriSign! Trusted Commerce