Stewart-MacDonaldEverything for building and repairing stringed instruments!
Your order cart Your order | Account | Saved list
Sign in
Email
800-848-2273, 9AM-6PM EST, M-F
Home Free catalog Quick order International Customer service

Home : Tools : Special tools for Tuner installation : Peghead Bushing Reamers

Peghead Bushing Reamers


Read 27 Reviews   |   Write a Review

Be ready for any tuner installation! Our custom-sized counterbore reamers ensure that your press-fit tuner bushings will fit correctly.

See details below

Email a friend
Peghead Bushing Reamers
 
Item# Description In stock Price Quantity
2060 Complete set of 5 SAVE $6.35 Yes
$79.90

2061 .328" (8.33mm) diameter Yes
$17.25

2062 .340" (8.64mm) diameter Yes
$17.25

2063 .348" (8.84mm) diameter Yes
$17.25

2064 .360" (9.14mm) diameter Yes
$17.25

2065 .393" (9.98mm) diameter Yes
$17.25


Selected currency  
 
 









 Processing...






Related items

Tuner Drill Jigs



Mandolin Peghead Drill Jig



Tuner Bushing Press



Brad Point Drill Bits



Tuner Drill Jigs
Mandolin Peghead Drill Jig
Tuner Bushing Press
Brad Point Drill Bits



Details
 Pictures
Before you install press-fit tuner bushings, be sure they'll fit correctly, so your tuners will work efficiently. Too tight, and they can chip the peghead finish or crack the wood. Too loose, and they can rattle or fall out. Our custom reamers cut a clean, accurate counterbore for a professional job.

Designed for slow-speed use in your drill press, each steel reamer is 2-3/4" (69.85mm) overall length, with a 1/4"-diameter (6.35mm) pilot and two 1" (25.40mm) cutting flutes. The set of five includes sizes for popular guitar and mandolin press-fit tuner bushings. If you have a repair shop, you'll want the complete set on hand. Be ready for any tuning machine installation!

The #2062 bushing reamer with .340" diameter is made for bushings on Waverly Guitar Tuning Machines.

The #2061 bushing reamer with .328" diameter is made for bushings on Waverly Mandolin Tuning Machines.

Important: Please measure your tuner bushings before your order a reamer. Most tuner and bushing measurements are available on stewmac.com product pages.

Install and remove press-fit peghead bushings cleanly
Don't use a hammer! Our Tuner Bushing Press gives you steady controlled pressure that will help protect the peghead finish, continue...


/\ Top of product page
 Ratings and reviews
Peghead Bushing Reamers
Peghead Bushing Reamers
 
5 out of 5 stars
Based on 27 ratings Write a Review
Sort reviews by
Displaying 1 – 10 1  2  3 >
5 11-06-2013
These are the ticket for accurate bushing holes

It's almost impossible to drill a properly sized neat hole for tuner bushings using a regular drill bit. These make the job so easy, and the bushings fit perfectly.

Larry Nair, Tahoe Guitar Co.  Gardnerville NV Read my reviews (7)
5 7-30-2013
Reamers!!!!

Drilling holes for tuners has always been a pain. With different manufacturers and changing dimensions, drilling is a time consuming and nerve-racking process. The Peghead Reamers take the stress off the process. If you have a shop or are a serious luthier, BUY THIS!!! I can't tell you how much time I saved! Did I mention how clean the holes come out too...

812 GUITARS  Greenwich, CT Read my reviews (2)
5 6-27-2013
High Quality Reamers

Super high quality. Very sharp and extremely accurate!! Would definitely buy again!!

Stack Guitars  Davenport, FL
4 5-04-2013
constructive criticism

Nice tool, I like the control it adds, even when used in a hand drill. But you need a .442 or .443. .440 is too tight when working with very hard wood as was the case with my maple neck. Pressing the bushings was a little bit more challenging than it needed to be. This is quarter sawn maple, so the potential for splitting was very real. Luckily that didn't happen. A slightly larger diameter reamer would be just the thing for this type of situation.

jdw guitars  white plains Read my reviews (4)
Customer supplied image for review
4 1-30-2013
Not Quite

Great tools. Simple and accurate, but to be complete the set needs an off-sized reamer of .380

doc  southport, nc Read my reviews (11)
5 6-22-2012
Wow!

I bought the whole set of these bushing reamers - this week I had two mandolins and a very old uke banjo in for repair and new tuners . One was an ancient bowl back 'neapolitan' mandolin. I bought new tuners and one of these cut the bushings so perfectly I was awe struck - bit of masking tape around the bit to give me an accurate depth check and it cut so fine. Just perfect. Not sure you can see it in this picture but it is perfect.

Leo Crossfield  UK Read my reviews (12)
Customer supplied image for review
5 4-21-2012
Perfect Tool!

This bushing reamer works perfect! I would much rather ream the bushing area and leave the rest of the smaller hole for support on the tuner shaft rather than do what many others do and just open the complete hole up to the bushing size. The cutters are of excellent quality and cuts are smooth and percise. The bushings pushed in by hand and were seated with a light tap of a dead blow for a perfect snug fit. Nice tool StewMac!

KickAxe USA  Rifle, CO Read my reviews (11)
5 4-14-2012
excellent tool!

Bought one of these to install Grover Sta-Tites and it cut very clean and true with no heat using my mini-mill. RPM was about 750 or so on a mahogany headstock. One can also flip the neck over and c'bore a little .060 deep clearance pocket for the small washer on the mounting face of these tuners for a flush fit. Good geometry on the cutting edges, good material, and good price for a quality tool. Would recommend to anyone and would buy again.

Perhaps Stew-Mac could offer a TicN coated version as well in the future for more abrasive woods?

arie s  los angeles Read my reviews (2)
5 3-09-2012
The perfect tool for the job

These peghead bushing reamers are the absolutely perfect tool for this job. After using this, the bushings on my tuning machines fit perfectly, and could be pressed in by hand to a snug fit, without risking a crack in the peghead. Well worth it.

Corky Long  Mount Kisco, NY
5 2-23-2012
Great tool

Essential tool

Maurizio Loschi  Modena,Italy Read my reviews (2)
Displaying 1 – 10 1  2  3 > /\ Top of Reviews


Shown on page 21 of our latest catalog.


Waverly® is a registered trademark of Stewart-MacDonald Manufacturing Company, Inc.
Select your items, then click ADD to order

To add items to your order, select the check box next to the item you want. You can edit the quantity you wish to purchase here, or in Your Order.

Select your items, then click Save for later

To add items to your saved list, select the check boxes next to the items you want. You can edit the quantity you wish to save here, or in your Saved List.


Toll-free order line:   800-848-2273   9am-6pm Eastern Time, M-F



Your order | Your account | Trade Secrets E-mail Newsletter
Home | Free catalog | Catalog Quick Order | International | Customer service
Our guarantee | Shipping | Security & Privacy | Contact us
Site map | About Us | Employment
© Copyright 2014 Stewart-MacDonald
Your shopping is secure with VeriSign! Trusted Commerce