These unique tools are for use after the frets have been installed, trimmed flush to the sides of the neck, and the ends uniformly beveled with a flat file. They go a step beyond our popular Fret End Dressing File, adding a single-cut toothed concave filing surface. This makes smoothing the fret ends and delicately blending them into the crown of the fret more efficient. A professional touch, and a great fix for fret ends that protrude in dry weather, too.
Available in two sizes, for medium and wide frets. SAVE when you order both sizes!
Efficient design: Each file has a slim shape and 30-degree angled end, for good control and ease of use. The right tool for the job.
Concave surface: Single-cut teeth help blend the fret ends into the fret crown. Medium: .080" (2mm) Wide: .120" (3mm)
Safe surface: Opposite the concave edge is a flat, untoothed surface to protect the fretboard when you're filing with the side surfaces.
Toothed sides: The single-cut teeth on the sides file away metal burrs and help smooth the bevel on the fret ends.
Safe corners: Each file also has smooth untoothed corners to help prevent damage to the fingerboard and the upper edges of bound necks.
Each of these sturdy steel files is 7-7/8" long (similar files from other suppliers are only 3"), a practical length for filing fret ends without jamming the handle against the edge of the fretboard. Cutting surface length is 2-3/4". The file tang is rubber-coated for comfort.
Works on stainless frets, too! All of our tools are suitable for use on stainless-steel fretwire, with the exception of our Fret Tang Nippers and Fret Cutters. Modern stainless-steel fretwire is known to be harder than the traditional nickel-silver blends, but our own shop experience indicates the wire does not cause premature wear of files or sandpapers.