More room to polish large guitars: 36"-long arbor shaft and a small housing for increased clearance.
Larger buffing surface: big 14" buffs, selected especially for instrument finishing.
The right speed: slow 715-rpm buff speed is ideal for delicate instrument finishes. Driven by a powerful 3/4-horse motor.
2012 upgrade: a compact powerhouse
Features that match the industrial buffers at major guitar factories:
Smooth running and quiet. Pillow block bearings on a half-inch-thick aluminum baseplate anchor the shaft for minimal vibration.
3/4-horse motor. Power for the large surface contact required to buff guitars.
This is a factory buffer scaled for a small shop.
StewMac Guitar Buffer: a compact powerhouse!
"Other buffers don't give you enough room to move the instrument, and they run too fast—burning off the finish you're trying to polish. StewMac's guitar builders and tool designers talked about what we wanted in a buffer, and what we want to avoid. No other company has designed a buffing arbor system so specifically for luthiers' needs."
Product Development Stewart MacDonald
#3080 Motor is for domestic use.
This 120-volt AC electrical appliance has a U.S. standard Type B plug with two flat parallel prongs and a grounding pin. 6.2 amps, 550 watts.
#3084 Motor is for international use. This 230-volt AC electrical appliance has a international plug CEE 7/7 (compatible with Type E and F receptacles) with two round prongs and two grounding clips on the sides and female contact to accept the grounding pin. 3.5 amps, 550 watts.
Buffing WheelsAlso sold separately
Big 14"-diameter canton-weave buffing wheels where chosen especially for instrument finishing. For maximum buffing surface, up to three wheels can fit on each side of the arbor (four wheels are included with the outfit). Additional wheels are sold separately.