| DEPARTMENTS |
|
| Accessories |
|
| Bindings,
trim |
|
| Bodies,
necks, wood |
|
| Books,
plans |
|
| Bridges,
tailpieces |
|
| Electronics,
pickups |
|
| Finishing
supplies |
|
| Fretting
supplies |
|
| Glues,
adhesives |
|
| Hardware,
parts |
|
| Inlay,
pearl |
|
| Kits |
|
| Knobs |
|
| Nuts,
saddles |
|
| Pickguards |
|
| Tools |
|
| Truss
rods |
|
| Tuners |
|
| Video, DVD |
|
|
|
|
Carbide Downcut Inlay Router Bit
The best cutters for inlay work and saddle slotting! Solid carbide lasts far longer than steel, and reverse spiral flutes cut downward for cleaner, "no fuzz" edges in routed cavities.
To use our 1/8"-shank bits in your laminate trimmer's 1/4" collet, see our #5246 Adapter Collet.
Sold individually or SAVE $10.00 when you buy the set of all five sizes.
See details below
|
|
|
| Item# |
Description |
In stock |
Price |
Quantity |
|
 |
|
|
|
|
|
|
|
Length 1-1/2" (38.10mm)
Shank diameter 1/8" (3.18mm)
Depth of cut 3/16" (4.76mm)
Use the larger bits for removing wood in the middle of your inlay work, and save the fine bits for the fine details. The fine detail bits are fragile, for routing intricate details only.
| Item | Primary use | Width of cut | | 5154 | For inlay routing and bridge saddle slots | 1/8" (0.1250", 3.18mm) | | 5153 | For inlay routing and bridge saddle slots | 3/32" (0.0938", 2.38mm) | | 5152 | For fine detail inlay routing | 1/16" (0.0625", 1.59mm) | | 5151 | For fine detail inlay routing | 3/64" (0.0469", 1.19mm) | | 5150 | For fine detail inlay routing | 1/32" (0.0313", 0.79mm) |
Shown on page 18 of our latest catalog.
|
|
|
|
Details
Pictures
