| DEPARTMENTS |
|
| Accessories |
|
| Bindings,
trim |
|
| Bodies,
necks, wood |
|
| Books,
plans |
|
| Bridges,
tailpieces |
|
| Electronics,
pickups |
|
| Finishing
supplies |
|
| Fretting
supplies |
|
| Glues,
adhesives |
|
| Hardware,
parts |
|
| Inlay,
pearl |
|
| Kits |
|
| Knobs |
|
| Nuts,
saddles |
|
| Pickguards |
|
| Tools |
|
| Truss
rods |
|
| Tuners |
|
| Video, DVD |
|
|
|
|
A revolution in guitar setup!
Nut Slotting Gauge
Here's a device that will revolutionize the way you set up a guitar. The Nut Slotting Gauge quickly and precisely measures the heights of the strings over the first fret, so you can file nut slot depths more accurately than ever before. That means easier, more consistent playability, that you can custom-tailor to individual instruments and playing styles. No more guesswork or "eyeballing" the string heights, and no more searching for elusive combinations of feeler gauges.
SAVE! Our Nut Slotting Gauge and Neck Relief Gauge are available in a money-saving set.
See details below
|
|
|
| Item# |
Description |
In stock |
Price |
Quantity |
|
 |
|
|
|
|
|
|
|
|
|
|
|
Nut Slotting Gauge
Instructions
|
i-2003 Updated 04/08
 The Nut Slotting Gauge precisely measures the heights of the strings over the first fret, so you can cut accurate string slots.
Step 1: Set the Nut Slotting Gauge over the first fret, with the indicator tip resting on the middle of a string. Zero the dial bezel. Press the string down to the first fret. Press on both sides of the fret, to be sure you get an accurate reading. The dial now indicates the height of the string over the first fret.
Step 2: Pull the string out of the nut slot (our #4803 String Lifter is a great time-saver). File the slot deeper, replace the string and take another reading. Repeat until you reach the height you need. Note: If the strings are too high at the first fret they can be difficult to play, and if they're too low they can buzz. The strings on electric guitars can generally be closer to the first fret than on acoustics. This is also true for players with a lighter touch vs. players with an aggressive style. The bass strings should be gradually higher in the nut than the treble strings.
Step 3: Move the gauge to each of the remaining strings and follow the same procedure. The thumbscrew that holds the dial indicator post in place can be loosened, and the indicator rotated 180 degrees. This lets you keep all of the gauge’s feet on the fretboard and still view the dial from the same side as you move the gauge across the neck.
|
|
Shown on page 22 of our latest catalog.
|
|
|
|
Details
Pictures
Instructions
