The 18" long extruded aluminum block is comfortable to hold, and its stiffness and precisely machined radius assure accuracy that's not possible with a wooden block of the same length. We designed this tool for a lifetime of use in the busy shop.
Lifetime durability • Extended length Fast, accurate fret leveling and fingerboard shaping
Dimensions: 18" long x 2-3/4" wide (457.2mm x 69.85mm) Seven different radii are available, for popular fretboard shapes.
A great clamping caul for glue-in fret jobs! "I use aluminum fretboard sanding blocks to hold and clamp the frets in place while the glue dries...A scrap of Neoprene on the bottom of the caul protects the frets from the texture of the machined surface, and serves as a cushion that conforms to the radius a little better, conforming to any slight variations in the fretboard." Excerpt from Erick Coleman's bookFret Work Step-By-Step
Cut and stick! 3M Stikit Gold Paper Self-adhesive Abrasives are the right width for our leveling and radius sanding tools.
Attach 80 through 220-grits for radiusing and leveling the fingerboard, and 220 through 400-grits for leveling the frets.
Works on stainless frets, too! All of our tools are suitable for use on stainless-steel fretwire, with the exception of our Fret Tang Nippers and Fret Cutters. Modern stainless-steel fretwire is known to be harder than the traditional nickel-silver blends, but our own shop experience indicates the wire does not cause premature wear of files or sandpapers.