| DEPARTMENTS |
|
| Accessories |
|
| Bindings,
trim |
|
| Bodies,
necks, wood |
|
| Books,
plans |
|
| Bridges,
tailpieces |
|
| Electronics,
pickups |
|
| Finishing
supplies |
|
| Fretting
supplies |
|
| Glues,
adhesives |
|
| Hardware,
parts |
|
| Inlay,
pearl |
|
| Kits |
|
| Knobs |
|
| Nuts,
saddles |
|
| Pickguards |
|
| Tools |
|
| Truss
rods |
|
| Tuners |
|
| Video, DVD |
|
|
|
|
Accurate pegholes without a drill press!
Tuning Machine Drill Jig
For solid-peghead guitars
Your hand drill will stay perfectly aligned for drilling a peghead, thanks to hardened bushings in our adjustable drilling jig. Simply clamp the jig to the peghead, with a scrap wood block on the opposite side of the peghead to help prevent drill bit chip-out.
Jig comes with 3 bushing blocks. Order additional bushings blocks for drilling 6-in-line pegheads.
See details below
|
|
|
| Item# |
Description |
In stock |
Price |
Quantity |
|
 |
|
|
|
|
|
Three bushing blocks that are allen-adjustable for any peghole spacing (allen wrench included).
1/4" (6.35mm) and 10mm (25/64") bushing blocks can be ordered separately to add to the jig when drilling 6-in-line pegheads, mandolins or other setups.
Each bushing block is 3/4" x 2-1/4" (19.05mm x 57.15mm). The brass guide rods are 7" (177.80mm) long and are spaced 1-1/2" (38.10mm) apart.
Use a 10mm drill bit.
Shown on page 23 of our latest catalog.
|
|
|
|
Details
Pictures
