| DEPARTMENTS |
|
| Accessories |
|
| Bindings,
trim |
|
| Bodies,
necks, wood |
|
| Books,
plans |
|
| Bridges,
tailpieces |
|
| Electronics,
pickups |
|
| Finishing
supplies |
|
| Fretting
supplies |
|
| Glues,
adhesives |
|
| Hardware,
parts |
|
| Inlay,
pearl |
|
| Kits |
|
| Knobs |
|
| Nuts,
saddles |
|
| Pickguards |
|
| Tools |
|
| Truss
rods |
|
| Tuners |
|
| Video, DVD |
|
|
|
|
Keeps pegholes perfectly aligned and spaced
Tuner Drill Jigs
These special jigs keep your hand drill in the correct perpendicular alignment for drilling pegholes, and ensure that your tuning machines will be accurately aligned and spaced. This lets the string posts turn freely, so your tuners will operate efficiently. Use the jigs for new instruments, or for correcting tuning problems caused by misaligned pegholes.
See details below
|
|
|
| Item# |
Description |
In stock |
Price |
Quantity |
|
 |
|
|
|
|
| | Item | | String post spacing | | | 2068 | Jig for 3-on-plate tuners | Standard 1-3/8" | (34.925mm) | | | 2069 | Jig for 6-in-line tuners | Fender 15/16" | (23.8125mm) | | | 2070 | Jig for 12-string guitars | Standard .922" | (23.4188mm) | |
The jigs are for use with a 1/4"-diameter bit. For larger pegholes (or for counterboring for press-fit bushings), remove the jig after drilling, and enlarge the holes with one of our piloted Peghead Bushing Reamers.
Each jig is made of long-life high-density 1" x 1" Micarta® and includes, two steel transfer pins, two steel alignment pins and instructions.
For mandolin pegholes, see our Mandolin Peghead Drill Jig.
Shown on page 57 of our latest catalog.
|
|
|
|
Details
Pictures
