Carbide Downcut Inlay Router Bits

This is my first inlay/routing work, and I am very pleased with the quality of this bit. I am using the 3/32" to rout a Gibson rosewood fretboard and while I have not attempted it yet, the practice runs I've been doing on wood are excellent. I was able to practically remove one layer at a time of finish!

These small, hard to find, downcut bits work very well. So well a person needs to use care not to cut way more than needed. Guess how I know this... I needed very clean cuts and these bits performed that task nicely. Thanks, Stew-mac.

They cut fast, quick and chip less. If you're low on cash, try at least #2 and #5

I was using a router bit that came with a 200 piece tool kit and when I switched to one of these bits I could tell there was no comparison. The router didn't "pull" itself and allowed me to effortlessly make clean cuts.

Fabulous product for fine detail work, saddle slotting and inlay. Super sharp and as advertised, no fuzzy edges.

Have used various other bits for inlaying but none compare with these downcut inlay bits

Smooth and steady, cuts a fine line.

These are really fast and clean cutting. I just love how you can really make some nice precision cuts. Great product.

These bits changed how I make inlays. Absolutely awesome. They're also great for mini pilot holes for truss rod cover screws.

I used the bit in a popular mini mill machine to cut a slot in a newly fabricated bridge for an acoustic. The speed was lower than what your usual router or Dremel tool produces, yet it worked great and produced a clean slot. Tony Maddi