|
|
|
 |
More consistent fret installation!
Fret Press System
Pressing frets into place is a time-saving and accurate method widely used in guitar production. Our self-leveling steel fret press caul, fitted to our heavy-duty arbor press, brings this method to your shop. The arbor press is made of cast steel, with an adjustable steel pinion for firm pressure.
See details below
|
|
|
| Item# |
Description |
In stock |
Price |
Quantity |
|
|
|
|
|
|
|
|
|
|
|
#4483 Fret Press System includes:
• Arbor press
• Self leveling caul
• Hardwood neck support (contoured and cork-lined)
• Five radiused brass fretting inserts
Radiused brass fretting inserts are interchangeable, 2-1/2" (63.50mm) wide.
Radii included 7-1/4", 9-1/2", 12", and 16"-radius fretboards, and a special 6"-radius caul to hold down the fret ends for gluing.
(184.15mm, 241.30mm, 304.80mm, 406.40mm, and 152.40mm)
Additional radii are available: Fret Press Inserts
Dimensions
 | Base | | | 9-1/2" x 4" x 2" high (241.30mm x 101.60mm x 50.80mm) | | Overall height minus the ram | | | 10-1/2" (266.70mm) | | Ram length | | | 7-1/2" (190.50mm) and 3/4" (19.05mm) square | | Handle diameter | | | 1/2" (12.70mm) | | Handle length | | | 11-3/4" (298.45mm) | | Maximum vertical opening | | | 4-1/2" (114.30mm) | | Throat depth | | | 4-3/4" (120.65mm) | |
The distance from the center of the ram to the vertical support beam is 3-1/8" (79.38mm). This press can exert up to 1/2 ton of pressure (453.6kg).
|
|
Shown on page 10 of our latest catalog.
|
|
|
|
|
Details
Pictures
