| DEPARTMENTS |
|
| Accessories |
|
| Bindings,
trim |
|
| Bodies,
necks, wood |
|
| Books,
plans |
|
| Bridges,
tailpieces |
|
| Electronics,
pickups |
|
| Finishing
supplies |
|
| Fretting
supplies |
|
| Glues,
adhesives |
|
| Hardware,
parts |
|
| Inlay,
pearl |
|
| Kits |
|
| Knobs |
|
| Nuts,
saddles |
|
| Pickguards |
|
| Tools |
|
| Truss
rods |
|
| Tuners |
|
| Video, DVD |
|
|
|
|
ColorTone Waterbase Retarder
Additive for waterbase lacquers when hot/dry conditions cause the finish to dry too fast. 8-ounce bottle.
ColorTone® is a registered trademark of Stewart-MacDonald Manufacturing Company, Inc.
|
|
|
|
|
|
|
|
|
|
|
ColorTone Waterbase Retarder
Directions for use
|
i-5575 Updated 05/02
Additive for brush and spray application of ColorTone Waterbase Guitar Lacquers
1. Add 5-15% by liquid volume of retarder to waterbase lacquer to achieve desired flow and leveling action. Not for use with nitrocellulose lacquer.
2. Mix well during addition of retarder into lacquer. Mix for 1 minute and allow to activate for a minimum of 1 hour before using retarded lacquer.
3. The percentage of retarder may be adjusted to achieve the desired flow, based on the temperature and humidity of your finishing area and method of application. Do not exceed 20% by liquid volume.
KEEP OUT OF THE REACH OF CHILDREN
Contains: | Compound Name | CAS# | | Dipropylene Glycol Methyl Ether | 34590-94-8 | | Performance Additives | Proprietary | | Water | 7732-1 8-5 | | VOC Content: Under 250 grams/liter |
|
|
Shown on page 37 of our latest catalog.
|
|
|
|
Details
Pictures
Instructions
