| DEPARTMENTS |
|
| Accessories |
|
| Bindings,
trim |
|
| Bodies,
necks, wood |
|
| Books,
plans |
|
| Bridges,
tailpieces |
|
| Electronics,
pickups |
|
| Finishing
supplies |
|
| Fretting
supplies |
|
| Glues,
adhesives |
|
| Hardware,
parts |
|
| Inlay,
pearl |
|
| Kits |
|
| Knobs |
|
| Nuts,
saddles |
|
| Pickguards |
|
| Tools |
|
| Truss
rods |
|
| Tuners |
|
| Video, DVD |
|
|
|
|
Covers For Humbucking Pickups
Designed to fit humbucking pickups with 1-15/16" (1.937") or 2" polepiece spread (measure from the centers of the outer polepieces). Each cover is 2-3/4" x 1-17/32".
|
|
|
| Item# |
Description |
In stock |
Price |
Quantity |
|
 |
|
|
|
|
|
|
i-1791 Updated 10/04
Note on soldering
 Slide the cover onto the pickup, being careful not to pinch any wires. Fasten the cover with two small solder joints, one on each side, as pictured. Use a clamp or small vise to hold the cover in place while soldering. If necessary, lightly sand or file the area to take the solder.
|
|
Shown on page 47 of our latest catalog.
|
|
|
|
Details
Pictures
Instructions
