Stewart-MacDonaldEverything for building and repairing stringed instruments!
Your order cart Your order | Account | Saved list
E-mail us or call 800-848-2273
 Home   Free catalog   Quick order   International   Customer service 
Home : Bridges, tailpieces : Electric guitar, non-trem bridge parts : Compensated Telecaster Bridge Saddles
Trade Secrets Newsletter
 Tell me more

DEPARTMENTS
Accessories
Bindings, trim
Bodies, necks, wood
Books, plans
Bridges, tailpieces
Electronics, pickups
Finishing supplies
Fretting supplies
Glues, adhesives
Hardware, parts
Inlay, pearl
Kits
Knobs
Nuts, saddles
Pickguards
Tools
Truss rods
Tuners
Video, DVD

Online video at stewmac.com

MORE FROM STEWMAC
Shop by instrument
Free information
Gift certificates
New items
Web exclusives
E-mail newsletter

Compensated Tele Saddles

A set that retains the vintage look and tone, but helps improve traditional 3-saddle Tele® guitar bridge intonation. Each saddle is angled for better string length compensation.

See details below
Bridges,_tailpieces : Electric guitar, non-trem bridge parts : Compensated Tele Saddles : A set that retains the vintage look and tone, but helps improve traditional 3-saddle Tele guitar bridge intonation. Similar to the saddles installed on the Danny Gatton signature series guitars.
 Item#  Description   In stock   Price   Quantity   
 5167  Set of 3  Yes   $14.55 
 3 or more  $11.45 


Quantity prices apply to multiples of the same item number Selected currency  

Details
 Pictures
Related items
Instructions
 

Compensated Saddles for Telecaster

Installation instructions



i-5167 Updated 07/08

The compensated Tele saddles are slanted to improve intonation, but they may not perfectly intonate every string. If your guitar is set-up to your satisfaction, you will need to take notes on the set-up and use the same gauge of strings to ensure the same playability with the new saddles. If the instrument needs to be set-up as well, consult #0570 Dan Erlewine's Guitar Player Repair Guide for the proper set-up procedures, or visit your local repairman.

Carefully measure the height of every string from the top of the 14th fret to the bottom of the strings. Next, remove the strings and the old saddles.




Install the new saddles as shown in the illustration. Install new strings and adjust the height of each saddle until you reach your original 14th fret measurements. If done correctly, the strings should follow the radius of the fingerboard.

The final step is to set intonation. If you do not own an accurate electronic tuner, leave this step to a technician. Tune the open strings to pitch and check the low E string fretted at the 12th fret. If the note is sharp (compared to the open E note), move the saddle back. If the note is flat, move the saddle forward. It may take several tries to get it right, and be sure to retune the open notes after every movement of a saddle. When you have the bass E string intonated, check the A string. “Average” the position of the saddle between this string pair. Set the remaining saddles using the same procedure. If any of the strings are very flat or sharp you may have to rotate the saddle so it angles in the opposite direction.







Shown on page 63 of our latest catalog.

Toll-free order line:   800-848-2273   9am-6pm Eastern Time, M-F
Summer 2008 Catalog FREE
Find the lutherie tools, parts and supplies
for your shop–fretting, finishing, binding,
building, repair and more.
Your order | Your account | Trade Secrets E-mail Newsletter
Home | Free catalog | Catalog Quick Order | International | Customer service
Our guarantee | Shipping | Security & Privacy | Contact us
Site map | About us | Employment
© Copyright 2008 Stewart-MacDonald
Your shopping is secure with VeriSign! HACKER SAFE certified sites prevent over 99.9% of hacker crime.