| DEPARTMENTS |
|
| Accessories |
|
| Bindings,
trim |
|
| Bodies,
necks, wood |
|
| Books,
plans |
|
| Bridges,
tailpieces |
|
| Electronics,
pickups |
|
| Finishing
supplies |
|
| Fretting
supplies |
|
| Glues,
adhesives |
|
| Hardware,
parts |
|
| Inlay,
pearl |
|
| Kits |
|
| Knobs |
|
| Nuts,
saddles |
|
| Pickguards |
|
| Tools |
|
| Truss
rods |
|
| Tuners |
|
| Video, DVD |
|
|
|
|
Accurately slotted and radiused
25-1/2" Fender Scale Fingerboard
These handsome kiln-dried fingerboards are slightly tapered in width, with a flat underside. They are unfretted (no inlays) and ready for trimming in your shop to fit a variety of neck widths.
We've done the critical work for you! The fret slots are .023" wide, to fit our Fretwire. Each fingerboard is radiused and extended Fender style to include a 1/8" flat-bottomed nut slot.
See details below
|
|
|
| Item# |
Description |
In stock |
Price |
Quantity |
|
 |
|
|
|
|
Approximate dimensions: 2-3/8" x 20-3/8" x 15/64" (6.03cm x 51.75cm x 5.95mm)
Radius: 12"
Fret slots: 24 + 1/8"-wide nut slot
TIP: Saw the fingerboard shorter at the 2nd fret (at the nut end) to install it on a Gibson 22-3/4" short scale guitar.
A note about ebony:
Ebony is usually not uniformly black. We offer Black Fingerboard Stain, as used by Gibson, Paul Reed Smith and other makers, for darkening the streaks on ebony fingerboards, bridges and peghead overlays when desired.
Shown on page 72 of our latest catalog.
|
|
|
|
Details
Pictures
