| DEPARTMENTS |
|
| Accessories |
|
| Bindings,
trim |
|
| Bodies,
necks, wood |
|
| Books,
plans |
|
| Bridges,
tailpieces |
|
| Electronics,
pickups |
|
| Finishing
supplies |
|
| Fretting
supplies |
|
| Glues,
adhesives |
|
| Hardware,
parts |
|
| Inlay,
pearl |
|
| Kits |
|
| Knobs |
|
| Nuts,
saddles |
|
| Pickguards |
|
| Tools |
|
| Truss
rods |
|
| Tuners |
|
| Video, DVD |
|
|
|
|
Lower price • Traditional design • Smooth action
Model B70 Bigsby Vibrato
Featuring a traditional design licensed by Bigsby, here's a money-saving imported die-cast aluminum vibrato for thin archtops, or solidbodies such as the Les Paul.® The string tension bar has nylon washers for smooth operation.
See details below
|
|
|
Tension spring, traditional swiveling steel arm and installation instructions are included. Felt pads help protect the guitar's finish.
The Bigsby B70 vibrato is designed to fit 1-1/2" to 2-1/4" (38.10mm to 57.15mm) guitar body thicknesses. The unit mounts with four supplied screws; two attach to the guitar top. The hinged mounting plate extends 1-5/16" (33.34mm) over the end of the guitar, with 1-9/32" (32.54mm) screw hole spacing.The plate has a strap button hole located approximately 1" (25.4mm) from the top of the guitar. The unit extends approximately 6-5/16" (160.34mm) from the mounting plate to the center of the string tension bar.
SAVE when you order our Locking Roller Bridge with Bigsby B70 Vibrato.
Les Paul® is a registered trademark of Gibson Guitar Corporation.
Shown on page 67 of our latest catalog.
|
|
|
|
Details
Pictures
