| DEPARTMENTS |
|
| Accessories |
|
| Bindings,
trim |
|
| Bodies,
necks, wood |
|
| Books,
plans |
|
| Bridges,
tailpieces |
|
| Electronics,
pickups |
|
| Finishing
supplies |
|
| Fretting
supplies |
|
| Glues,
adhesives |
|
| Hardware,
parts |
|
| Inlay,
pearl |
|
| Kits |
|
| Knobs |
|
| Nuts,
saddles |
|
| Pickguards |
|
| Tools |
|
| Truss
rods |
|
| Tuners |
|
| Video, DVD |
|
|
|
|
1/8" Allen Nut Hot Rod
A smaller Allen adjustable truss nut for most instruments. Hot Rod® Truss Rod's smooth two-way action steel rods correct upbow and backbow, resulting in complete control over the neck.
See details below
|
|
|
|
|
|
|
|
|
|
|
Easy to install. The Hot Rod® fits in a straight channel. For proper operation, this truss rod must be installed so
that the active rod (the rod with the adjustment nut) is below the passive rod. A wooden filler stick is not required.
Smooth 2-way action with superior strength for stubborn necks.
Our Hot Rod neck adjustment system features twin rods in threaded brass collars. The stainless steel active rod turns for
smooth neck alignment, with 2-way action to correct upbow and backbow.
The Hot Rod requires an access cavity for
the adjustment nut, and a straight 7/32"-wide x 7/16"-deep slot (measured from the bottom of the fretboard) for installation.
Pick the Hot Rod Truss Rod size you'll need:
|
Instrument
Resonator guitar
Acoustic guitar with 12th fret at the body
Acoustic guitar with 14th fret at the body
Electric guitar
Banjo
Bass
|
Size
12-1/4"
12-1/4"
14-1/4"
18"
18"
24"
|
We've designed the Router Bit for Hot Rod Truss Rods especially for routing your neck to fit
our truss rods.
Hot Rod® is a registered trademark of Stewart-MacDonald Manufacturing Company, Inc.
|
Shown on page 69 of our latest catalog.
|
|
|
|
Details
Pictures
