Stewart-MacDonaldEverything for building and repairing stringed instruments!
Your order | Account | Saved list

HACKER SAFE certified sites prevent over 99.9% of hacker crime.
 Home   Free catalog   Quick order   International   Customer service 
Home : Free information : Nuts, saddles : Wilkinson Compensated Tele Saddles
Trade Secrets Newsletter
 Tell me more

DEPARTMENTS
Accessories
Bindings, trim
Bodies, necks, wood
Books, plans
Bridges, tailpieces
Electronics, pickups
Finishing supplies
Fretting supplies
Glues, adhesives
Hardware, parts
Inlay, pearl
Kits
Knobs
Nuts, saddles
Pickguards
Tools
Truss rods
Tuners
Video, DVD

Online video at stewmac.com

MORE FROM STEWMAC
Shop by instrument
Free information
Gift certificates
New items
Web exclusives
E-mail newsletter


Wilkinson Compensated Tele Saddles

Installation instructions



i-5071 Updated 03/03



These compensated saddles for Tele® can be slanted to perfectly intonate every string. If your guitar is set-up and playing to your satisfaction, you will need to take notes on its set-up and use the same gauge of strings to ensure the same playability with your new saddles. If the instrument needs to be set-up as well, consult #0570 Guitar Player Repair Guide for proper set-up procedures, or visit your local repairman.

Carefully measure and record the height of each string from the top of the 14th fret to the bottom of the string. Next, remove the strings and the old saddles.

Install the new saddles with angles set approximately as illustrated. Install new strings and adjust the height of each saddle until you reach your original 14th fret measurements. For a good set-up, the strings should follow the radius of the fingerboard.


The final step is to set your guitar's intonation. If you do not own an accurate electronic tuner, leave this step to a technician. Tune the open strings to pitch and check the low E and A string fretted at the 12th fret. If both of the fretted notes are sharp (compared to the open notes), move the saddle back, if they are flat move the saddle forward. However, if one is sharp and the other is flat, loosen the saddle pivot screw (using the Allen wrench provided) and angle the saddle so that the sharp string becomes longer and the flat string becomes shorter. Make these forward/back and angle adjustments until both strings are in tune. It may take several tries to get it right for each pair of strings, and be sure to retune the open notes after every movement of a saddle. When you have the E and A strings intonated, set the remaining saddles using the same procedure.






Wilkinson Adjustable Compensated Vintage Tele Bridge and Saddles


Toll-free order line:   800-848-2273   9am-6pm Eastern Time, M-F
Your order | Your account | Trade Secrets E-mail Newsletter
Home | Free catalog | Catalog Quick Order | International | Customer service
Our guarantee | Shipping | Security & Privacy | Contact us
Site map | About us | Employment
© Copyright 2008 Stewart-MacDonald