Stewart-MacDonaldEverything for building and repairing stringed instruments!
Your order cart Your order | Account | Saved list
Sign in
800-848-2273, 9AM-6PM EST, M-F
Home Free catalog Quick order International Customer service

Home : Free Information : Building, general : Tool instructions : Waverly Tuner Drill Jig Instructions

Waverly Tuner Drill Jig Instructions

Email a friend

i-4858 Updated 12/12



The Waverly Tuner Drill Jig quickly locates mounting screw holes for Waverly guitar and ukulele tuners, as well as Grover Sta-Tites. It also keeps the drill bit perpendicular to the peghead for straight, accurate hole drilling.

Depending on your peghead shape and preference, choose how the tuners will be positioned:

Parallel with the edge of the peghead.


Parallel to the top of the peghead.


Parallel to the center of the peghead.


Place a strip of low tack masking tape down the center of the back of the peghead. Measure and carefully mark out the centerline on the tape. Align the jig parallel to the center-line.


4858-1This jig requires a 5/64" drill bit.­ ­Measure 13/16" from the bottom of the bit and mark this location with tape or a stop collar to avoid drilling too deep.

Drill the mounting screw holes using a hand drill and repeat for each tuner.

Waverly Tuner Drill Jig
Waverly Tuner Drill Jig

Depth-stop Drill Bits
Depth-stop Drill Bits

Toll-free order line:   800-848-2273   9am-6pm Eastern Time, M-F

Your order | Your account | Trade Secrets E-mail Newsletter
Home | Free catalog | Catalog Quick Order | International | Customer service
Our guarantee | Shipping | Security & Privacy | Contact us
Site map | About Us | Employment
© Copyright 2014 Stewart-MacDonald
Your shopping is secure with VeriSign! Trusted Commerce