Fret/Fingerboard Levelers

  • 51 Reviews
  • Write a review

Precision-ground for flatness.
Fast, accurate leveling tools for the pro shop.

Read more
Fret/Fingerboard Levelers 8" length

8" length

Item # 4577
In stock, ready to ship!

$36.82

+
Fret/Fingerboard Levelers 16" length

16" length

Item # 4578
In stock, ready to ship!

$47.94

+
Fret/Fingerboard Levelers 24" length

24" length

Item # 4579
In stock, ready to ship!

$75.28

+
Currency:
Total: $0.00
Quantity: 20

Video

Fret/Fingerboard Levelers

3 sizes to make any fretboard absolutely level.


Subscribe to StewMac's channel on

Details

Precision-ground for flatness.
Fast, accurate leveling tools for the pro shop.

Each heavyweight steel tube is precision-ground for flatness on the narrow sides. Attach abrasive to quickly level frets or unfretted fingerboards.

Each heavyweight rectangular 1" x 2" steel tube is precision-ground for flatness on two opposite sides. The tool's edges are smooth to prevent gouging.

Available in three lengths, to level any fingerboard.

Roger Sadowsky, ace builder and repairman, wrote us to say:
"I have been leveling fingerboards and frets for 30 years and thought I was pretty set in my ways. However, I have recently tried the 16" steel levelers (#4578) and man, talk about teaching an old dog new tricks! My fingerboards have never been better, and they work much better than files for leveling frets. Thank you again, StewMac!!!"

Cut and stick!
3M Stikit Gold Paper Self-adhesive Abrasives are the right width for our leveling and radius sanding tools. Attach 80 through 220-grits for radiusing and leveling the fingerboard, and 220 through 400-grits for leveling the frets.

Works on stainless frets, too!
All of our tools are suitable for use on stainless-steel fretwire, with the exception of our Fret Tang Nippers and Fret Cutters. Modern stainless-steel fretwire is known to be harder than the traditional nickel-silver blends, but our own shop experience indicates the wire does not cause premature wear of files or sandpapers.


Ratings & Reviews

Fret/Fingerboard Levelers

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
  • Based on 51 Reviews
Displaying 4 of 6 1 2 3 4 5 6
Write a review

Use neck support and caution.

By Steve N from Santa Barbara, California
(Customer's Reviews) Monday, March 19, 2012


I bought the 24-inch version to level bass guitar necks. I had previously used a 6-inch whetstone. While the whetstone worked fine, I was always bothered by the fact that with a shorter stone/file, you never really know whether fret 1 is the same height as fret 20.

With this, you do, but you must use it with caution. The nice thing about the bar is that it is very heavy -- you can let the weight of the bar do the work, and not have to worry whether you're using the same amount of hand pressure. However, you MUST MUST MUST use some kind of neck support, such as the $11 neck caul also sold at StewMac. If you do not, the weight of the bar will cause the neck to deflect in the middle. This will cause the neck to sag in the middle and bow -- which means you'll be removing more material from the high and low frets than the middle. That's no good.

The other con of this unit is that the flat ground surface is only an inch wide, which means you really need to be careful about following the radius of the fingerboard and about staying true to the string path down the neck. Another con is that the stickit paper is only available in 320 rather than 600. 320 is still pretty aggressive for anything but serious leveling and leaves a lot of marks.

All in all, this tool has no equal if you use it right. But you must do learn to do just that. (Or else, like me, you'll have a neck that needs a re-fret.) However, I'd say that for most home users, it would be better to get one of the shorter leveling files or the diamond coated levelers. And no matter what you get, order one of the fret rockers.

works great

By Set-up Technician from Solon,Ohio
(Customer's Reviews) Sunday, November 06, 2011


I have used the leveler 4 times and it work great. Keep up the good work.

young luthier

By Set-up Technician from Solon,Ohio
(Customer's Reviews) Saturday, November 05, 2011


I performed 3 fret leveling jobs. The bar made the job easy.

Great Tool!

By bomark2002 from WV
(Customer's Reviews) Thursday, October 27, 2011


Excellent for fret leveling accuracy.

Well Worth It!!!

By Isaac B. from Austin, TX 78725
(Customer's Reviews) Sunday, September 04, 2011


Simple tool that delivers great results on leveling a fretboard and leveling frets afterward. Don't put off buying this, you'll thank yourself later.

Brilliant

By stever from Ruegely England
(Customer's Reviews) Monday, August 29, 2011


I used to use a long sharpening stone for fret levelling. Now, with this fret leveller I can remove material much faster and with great accuracy and flatness.

Fret levelers

By Tom Sommerville from Singapore
(Customer's Reviews) Sunday, August 14, 2011


As usual a superb product with many uses beyond leveling frets. This takes a lot of the guesswork and worry out of re-fret jobs

Lo uso per mille lavori

By Marco Ferrari from Italy
(Customer's Reviews) Friday, August 05, 2011


Fantastico! Giusto peso etc... fate passare le corde dentro due alla volta e rettificate con le corde in tensione ed in posizione "di suonaggio". Altro che neck jig!!

Very nice!

By Marv from Cleveland, TN
(Customer's Reviews) Saturday, July 30, 2011


Works great!

Fret to the next level!

By No name brand from Gatineau, QC, Canada
(Customer's Reviews) Tuesday, June 21, 2011


If you combine this with the 3M Stikit, that's when it all make sense. I'm a hobbyist luthier and I can say that this made a significant difference in term of neck action (lower). Great addition to the fretting tool box

Displaying 4 of 6
1 2 3 4 5 6


Shown on page 10 of our latest catalog.