Micro-Mesh Finishing Abrasives Kit

  • 17 Reviews
  • Write a review

Cushioned for a scratch-free mirror finish. Micro-Mesh™ features tiny abrasive crystals on resilient cloth-backed latex.

Read more

Micro-Mesh Finishing Abrasives Kit

Item # 3706
In stock, ready to ship!

$50.95

+
Currency:
Total: $0.00
Quantity: 20

Product Video

Micro-Mesh guitar finishing paper

Dan Erlewine uses Micro-Mesh to get rid of finish scratches, without using a buffer.


Subscribe to StewMac's channel on

Product Details

Cushioned for a scratch-free mirror finish. Micro-Mesh™ features tiny abrasive crystals on resilient cloth-backed latex.

These gentle "cushioned" particles generate less heat and friction than ordinary finishing papers, don't load up as quickly, and last up to 15 times longer. Use Micro-Mesh with soapy water to produce a scratch-free mirror shine on finishes and pickguards.

The kit includes:
18 Micro-Mesh abrasive sheets (two 3" x 6" pieces of each grit):
1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 and 12000-grit
Foam sanding block
Instructions

Micro-Mesh was developed for polishing jet windshields to maintain their optical clarity. Imagine how your instrument will look! Great for repairing scratches and overspray. Use them for polishing frets, too.

Also see: Micro-Mesh Touch-up Stick and Soft Touch Finishing Pads.


Product Instructions

Wet-sand before buffing

When, why, and how to wet-sand.

Ratings & Reviews

Micro-Mesh Finishing Abrasives Kit

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
  • Based on 17 Reviews
Displaying 2 of 2 1 2
Write a review

If I Weren't A Guitar Repairman

By Guitartec from Coventry, RI USA
(Customer's Reviews) Friday, July 29, 2011


I'd be a Micro Mesh Salesman. This stuff is THE BEST!!! About 10 years ago, I was orchestral trombone maker. This is where I first started using Micro Mesh. I now use it on everything from my teeth to spark plugs. Oh, and I only use this to polish frets. NOTHING WORKS BETTER TO MAKE FRETS GLOW THAN 4000 GRIT MICRO MESH.

Indispensible for finishing.

By Andrew Faltesek from Saint Paul, MN
(Customer's Reviews) Friday, July 15, 2011


I have been using the Micro-Mesh Abrasives to complete a shellac re-finish of a 60-80 year old bowlback mandolin that required extensive structural repairs. As good as I am with brushing, the shellac starts to set up extremely quick due to it's alcohol solvent, and imperfections are almost inevitable.

I used 3M imperial 1200 grit wet-or-dry paper to smooth things out between 6 coats on the top, then started to progressively smooth the finish with the micro-mesh. Unbelievable...you have total control over the desired gloss, and the top is beautiful. This product is also very good for touching up minor scratches on your guitar, etc., unless you like the road-worn look.

I am working on a 100 year-old violin stain/re-finish next, and the micro-mesh will be indispensable.

Great for final finish

By Patrick Patten, Patten Guitars from Fredericton, NB Canada
(Customer's Reviews) Sunday, July 10, 2011


These micro mesh papers are great. Wish they were around twenty years ago when I first started building guitars. They seem to last forever if you are careful with them. I like the final results I get with them. Makes getting to the buffing stage so much easier.

A little goes a long way!

By Kenny Barnwell from Nashville, TN
(Customer's Reviews) Wednesday, May 25, 2011


I purchased two sets of Micro-Mesh thinking I would use a set for finish work, one for metal, and one for polishing bone nuts and saddles, still having a set left for later. I was able to cut one set in half and use for metal, and finishing, so I have an unopened box I will keep for future work!

I first used the MM to clean rusted frets, screws, and rusted pickup pole pieces! I am amazed at the durability of the pads and the mirror finish they leave to even the most rusted parts! I can't wait to try MM on some future projects!

Micro Miracle!

By Peter, Arteus Guitars from Bonville, Australia
(Customer's Reviews) Wednesday, March 09, 2011


The Micro-Mesh abrasive sheets give the best and easiest finish to lacquers - especially nitrocellulose. Great product for the guitar maker who still likes a real gloss finish!

I love this kit!

By bigfootguitarco from Lafayette, IN
(Customer's Reviews) Friday, November 05, 2010


I was never happy with my fret finish until I tried these. I use one set for frets and the other for finishes. If you haven't tried these yet I would say give them a shot!

Amazing stuff!

By Ron57 from Valparaiso, IN
(Customer's Reviews) Friday, August 27, 2010


I'm finishing my first acoustic guitar build and tried the micro-mesh at the recommendation of someone else. Really amazing how it brings out the gloss and shine in the last few levels from 6000 to 12000. Very nice. You have to buy this.

Displaying 2 of 2
1 2


Shown on page 41 of our latest catalog.