Wiring Kit for Gibson® SG®

  • 9 Reviews
  • Write a review

Our complete outfit makes it easy to wire a Gibson® SG® or similar thin-solidbody guitar without guesswork.

Read more

Wiring Kit for Gibson® SG®

Item # 0125
In stock, ready to ship!


Total: $0.00
Quantity: 20


Our complete outfit makes it easy to wire a Gibson® SG® or similar thin-solidbody guitar without guesswork.

Features two volume and two tone controls, plus a right-angle pickup toggle switch. Easy-to-follow wiring diagram included.

Wiring Kit for Gibson SG includes:

Qty Item
1 Output jack (chrome)
2 .022uF capacitors
1 Knobs (black and cream)
1 Right-angle 3-way switch:
Switch length 2" (50.80mm)
Threaded portion 5/16" (7.94mm)
Required mounting hole dia. 1/2" (12.70mm)
Required body cavity depth 13/16" (20.64mm)
Requires at least 1-3/4" (44.45mm) from the center of the mounting hole to the edge of the control cavity for wiring clearance.
4 500K Alpha control pots
Shaft diameter 6mm split shaft, coarse knurling
Thread M8 x 0.75
Threaded portion 3/8" (9.52mm)
Required mounting hole diameter    5/16" (7.94mm)
Flat washer, lock washer and two mounting nuts included
12" Non-shielded guitar circuit wire, 22AWG white
24" Non-shielded guitar circuit wire, 22AWG black
12" Shielded guitar circuit wire, 26AWG inner conductor, black
Wiring diagram

Product Instructions

Metric 3-way Toggle Switch

Installation and wiring instructions for the 3-way Toggle Switch.

Ratings & Reviews

Wiring Kit for Gibson® SG®

  • Based on 9 Reviews
Write a review

sg rewire kit

By rich butler from galesburg michigan
(Customer's Reviews) Tuesday, November 13, 2012

quickest, simplest way to get all the correct parts. good stuff.

Great kit!

By VTRC from Portland
(Customer's Reviews) Wednesday, May 09, 2012

Fantastic kit. It took a bit of sanding the port for the jack, but it dropped right into my Epiphone G400. I liked my guitar before, but now I love it. The difference is night and day. The components were good, vastly better than the Epiphone stuff, but you can get better which is why I'm giving this 4 stars instead of 5. I'm SUPER happy with what I got and it's value, but with some really great and esoteric stuff out there that 5 stars needs to stay reserved for now. The instructions were very good.If you haven't done this before (I hadn't), I would recommend looking at a few other sets of instructions to fully understand what you're doing before you start. S-D has a fantastic diagram, and there are some great resources on the Les Paul forums.

bien , sauf le switch

By nixnix from france
(Customer's Reviews) Wednesday, November 23, 2011

kit complet , qui fait l affaire , seul le switch n est pas d une qualitT suffisante...

Could be better

By Nick.H from Sydney
(Customer's Reviews) Wednesday, September 07, 2011

Used this kit to restore an old SG Custom. Fairly impressed with the components, however, there is defiantly room for improvement. The switch seems a touch flimsy, however, for the cost its a worthwhile trade

Very Good Wiring kit. 

By Rockitdog from Cape Town, South Africa
(Customer's Reviews) Saturday, August 20, 2011

Great wiring kit for the price. Nice quality cable and the Switchcraft jack socket is a real bonus. The pots and switch are a little on the cheap side and some other cap options would be nice. But on the whole really good value for money.

Good kit for the price

By Garrett Suggs from Myrtle Beach, SC
(Customer's Reviews) Thursday, March 10, 2011

This kit had everything I needed to rewire my Tele Deluxe, save for one small issue - not enough wire. I'm sure on an SG that isn't a problem at all as the selector switch is near the rest of the pots. Good kit though.

small problem

By johnnyx from farmington, pa
(Customer's Reviews) Saturday, January 15, 2011

i replaced what was in my epi sg to kill the buzz i had in my sg but it didnt get rid of it so it maybe in the body.

SG Wiring kit-used in '74 Guild bass "restore"

By Pat Reilly from Agawam, Mass.
(Customer's Reviews) Wednesday, December 08, 2010

I used the kit for a beat to death Guild bass. It was an SG style bass so the kit was perfect. The Alternate wiring for independent volume and tone for each pickup was easy and sounds great! Great Kit,Great Price-What else could you want?

sg wiring

By Trav from potsdam ny
(Customer's Reviews) Sunday, September 12, 2010

I purchased this wiring for my epiphone special model which is like the cheapest model of epiphone. It originally had one volume control and one tone control and the pickup selector switch.So i had to cut out the body of the guitar to make room for the four pots and bigger switch that came with the kit. Most people would probable buy this kit for a guitar that had similar wiring to begin with so most wont have to cut out the guitar body like i did. I found the instruction easy to follow tho i have experience with wiring diagrams and a lot of soldering experience. I only took me a couple hours from start to finish. And I'm very happy with the sound . I wired it the alternate way that came with the instructions so i can control the volume of the pickups independently when the switch is in the middle position. I made the plate out of hardboard and aluminum tape but will soon make a plate of the same pattern out of polished sheet aluminum.

Shown on page 53 of our latest catalog.
  • SG® is a registered trademark of Gibson Guitar Corporation.