Close

Wiring Kit for Gibson® Les Paul® Guitar

4.0
  • 31 Reviews
  • Write a review
Wiring Kit for Gibson<sup>&reg;</sup> Les Paul<sup>&reg;</sup> Guitar Standard pots and chrome toggle switch

Standard pots and chrome toggle switch

Item # 0133
In stock, ready to ship!

$36.14

+
Wiring Kit for Gibson<sup>&reg;</sup> Les Paul<sup>&reg;</sup> Guitar Standard pots and gold toggle switch

Standard pots and gold toggle switch

Item # 0133-G
In stock, ready to ship!

$37.77

+
Wiring Kit for Gibson<sup>&reg;</sup> Les Paul<sup>&reg;</sup> Guitar Long-shaft pots and chrome toggle switch

Long-shaft pots and chrome toggle switch

Item # 0133-LS
In stock, ready to ship!

$49.21

+
Wiring Kit for Gibson<sup>&reg;</sup> Les Paul<sup>&reg;</sup> Guitar Long-shaft pots and gold toggle switch

Long-shaft pots and gold toggle switch

Item # 0133-LSG
In stock, ready to ship!

$53.33

+
 
Total:
Qty:
Scroll to Top

Wiring Kit for Gibson® Les Paul® Guitar

About This Item

Complete wiring kit for Gibson® Les Paul® guitar or bass.

The standard pots in this kit have 3/8" long threaded portion of the shaft, and the long shaft pots have a 3/4" long threaded shaft for Les Paul and similar solidbody guitars that have thicker tops.

Wiring Kit for Gibson® Les Paul® includes:

Qty Item
1 Output jack (chrome)
2 .022uF capacitors
2 Knobs (black and cream)
1 3-way switch: (choose chrome or gold)
Threaded portion 5/16" (7.94mm)
Required mounting hole dia. 1/2" (12.70mm)
Required body cavity depth 15/16" (23.81mm)
4 500K Alpha control pots
Shaft diameter 6mm split shaft, coarse knurling
Thread M8 x 0.75
Thread, long shaft 3/8" x 32
Threaded portion 3/8" (9.52mm)
Threaded portion, long shaft 3/4" (19.05mm)
Required mounting hole diameter    5/16" (7.94mm)
Required mounting hole, long shaft 3/8" (9.52mm)
12" Non-shielded guitar circuit wire, 22AWG white
24" Non-shielded guitar circuit wire, 22AWG black
12" Shielded guitar circuit wire, 26AWG inner conductor, black
48" Shielded guitar circuit wire, 26AWG inner conductor, black
Wiring diagram


Instructions

Product Instructions

Metric 3-way Toggle Switch

Installation and wiring instructions for the 3-way Toggle Switch, including diagrams for Les Paul, SG, Jimmy Page Les Paul, and other 2-pickup guitars.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.0
  • 4.26 average rating from 31 reviews
Sort by
5.0

Super good quality kit

By
(Customer's Reviews)


Excellant kit

3.0

with Alpha pots to fit Epiphone

By
(Customer's Reviews)


This kit does the job and has all you need.

However, at least in my Epiphone, the switch is a tight fit and doesn't allow you to rotate it in place to line up the switching up and down perfectly. And if your model of Epiphone has narrow routes for the wiring, it is probably better to use a 4 conductor wire from switch to pots instead of the included shielded circuit wires. My LP Classic has wide routes. And my LS100 has narrow routes...

Also the alpha pots are narrower to fit the Epiphone holes. They are not the best pots and tend to taper off suddenly. Once in awhile a few are doa. I would rather get CTS pots and a reamer to make the wood holes wider.

5.0

Gibson wiring kit

By
(Customer's Reviews)


Awesome service ! Easy rio install great diagrams. Thanks!!

5.0

Perfect for my Epiphone LP100!!!!

By
(Customer's Reviews)


When I found this product at a very reasonable price, and when my guitar at the same time wasn't in the greatest shape i decided to upgrade the electronics. these parts easily fit inside my guitar and wiring it up with the free schematic was very simplified and easy to understand. Great quality, great price and simply great in everyday possible!! Thanks Stew-mac! (Photo is showing how I set up my guitar. After soldering it together outside the guitar I then put it in the guitar, and started rocking out!)

5.0

Perfect for those Gibson Copies

By
(Customer's Reviews)


Gives a 50's LP classic sound with slight modification in wiring than the one came with the kit. Great stuff.

5.0

Another excellent transaction

By
(Customer's Reviews)


Wiring kit complete. Problem free. Had a question SM got right back to me. Great price. Sounds great. No surprise they did it again. Thanks StewMac.

5.0

Quality

By
(Customer's Reviews)


The Stewmac LP wiring kit is a excellent buy good wire, good electronics, and easy to use. Only concern of mine is the switch wire is short allow your self time to wire the switch its a tight fit.

5.0

Les Paul wiring kit

By
(Customer's Reviews)


The right parts at a good price. Sound quality is right up there. You may need additional wire depending on your guitar & wiring options. Very satisfied.

4.0

Everything you need included 

By
(Customer's Reviews)


Everything you need comes in this kit.You will need to have some extra wire around if it is a new guitar with no prior wiring included.I would suggest to StewMac to include a little bit more wire for people like me who built their own guitar but as long as people know they may be required to have more wire around this is still a great wiring kit.

5.0

Good enough

By
(Customer's Reviews)


You get everything you need to wire up an LP style guitar. My wife bought me a kit LP as a project, all was good except the wiring harness was a joke. This kit gives you an inexpensive way to add decent wiring, a little time consuming over a pre wired harness but a good value.

Showing 10 of 31 Read more reviews >>


StewMac PDF Catalog, page 55 See Wiring Kit for Gibson® Les Paul® Guitar
on page 55 of our StewMac Catalog PDF

12MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.



  • Les Paul® is a registered trademark of Gibson Guitar Corporation.