Standard Wiring Kit for Stratocaster

  • 13 Reviews
  • Write a review

Here's what you need for wiring those pickups into your Strat®!
All the parts, plus a diagram to show you how.

Read more

Standard Wiring Kit for Stratocaster

Item # 0137
In stock, ready to ship!

$28.30

+
Currency:
Total: $0.00
Quantity: 20

Product Details

Here's what you need for wiring those pickups into your Strat®!
All the parts, plus a diagram to show you how.

The standard kit is an economical choice for any wiring job. It has standard PVC-insulated wire and Alpha pots.

Standard Wiring Kit for Stratocaster includes

  • Output jack
  • 250K Alpha control pots (3)
  • .047uF ceramic capacitor
  • CRL Lever Switch: 5-way lever switch with mounting screws
  • Switch knobs: white and black
  • Non-shielded PVC-insulated circuit wire: 22 AWG, white 12" long
  • Non-shielded PVC-insulated circuit wire: 22 AWG, black, 24" long
  • Shielded guitar circuit wire: 26 AWG black 12" long
  • Wiring diagram

Be sure your control knobs will fit!
Alpha pots have a coarse-knurled 18-spline split shaft.

Switch specifications
Body cavity depth required 1-3/8" (34.93mm)
Mounting screw spacing 1-5/8" (41.28mm)
Lever stem .052" x .188" (1.32mm x 4.78mm)
Pickguard slot required 1/16" x 1-1/16" (1.59mm x 26.99mm)


Alpha control pot specifications
Shaft diameter 6mm split shaft, coarse knurling
Thread   M8 x 0.75
Threaded portion height   3/8" (9.52mm)
Required mounting hole diameter   5/16" (7.94mm)



Product Instructions

5-way CRL Lever Switch

Installation and wiring instructions for the 5-way CRL Lever Switch.

Ratings & Reviews

Standard Wiring Kit for Stratocaster

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
  • Based on 13 Reviews
Displaying 2 of 2 1 2
Write a review

Good all except for one important problem

By Tim R from USA
(Customer's Reviews) Wednesday, April 06, 2011


I just installed these parts in my new pickguard. The pots installed without a problem but the screws supplied with the 5-way switch are to short for a 3-ply pickguard. Now I have to find replacement screws in order for it to install.

Exactly what I needed

By Zonker from Madison, WI
(Customer's Reviews) Wednesday, March 30, 2011


This kit came with everything that I needed to rewire my Strat. I was even left with a few inches of wire left over afterwards, impressive considering that the wiring job included an extra switch.

Almost Perfect

By cjkokes from Pleasant Hill, IA
(Customer's Reviews) Sunday, November 07, 2010


This is a high quality kit, the only thing that would make it better would be vintage pushback wire instead of rubber insulated stuff because the insulation melts easily. But on a good note, these pots are very nice and turn so smoothly without crackling. I recommend this and the conductive tape to make your strat style guitar sound better.

Displaying 2 of 2
1 2


Shown on page 53 of our latest catalog.
  • Stratocaster® and Strat® are registered trademarks of Fender Musical Instruments Corporation.