Conductive Copper Tape - Set of 3

  • 113 Reviews
  • Write a review

Get rid of buzz and interference in your guitar.
Shield pickups and control cavities with this self-adhesive copper tape.

Read more

Conductive Copper Tape - Set of 3

Item # 0038
In stock, ready to ship!

$36.70 $32.66

+
Currency:
Total: $0.00
Quantity: 20

Details

Get rid of buzz and interference in your guitar.
Shield pickups and control cavities with this self-adhesive copper tape.

180" rolls for shielding pickups and control cavities to reduce hum, noise and radio interference. The self-adhesive backing is also conductive, so overlapped seams are electrically continuous. Wrap this tape around pickup coils for additional shielding.

Sold individually or SAVE when you buy the set of all three widths.

Conductive Copper Tape surface accepts solder.

Item Width Thickness Length
#0028 2" (50.80mm) .00125" (0.076mm, 1.25 mil) 180" (4.57m)
#0037 3/4" (19.05mm) .00125" (0.076mm, 1.25 mil) 180" (4.57m)
#0036 1/4" (6.35mm) .00125" (0.076mm, 1.25 mil) 180" (4.57m)

For quicker shielding in small, hard to reach areas, use our Conductive Shielding Paint. Also available: our Shielding Kit contains the materials for shielding one guitar.


Ratings & Reviews

Conductive Copper Tape - Set of 3

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
  • Based on 113 Reviews
Displaying 4 of 12 1 2 3 4 5 6 7 8 9 10 11 12
Write a review

Makes shielding a cinch 

By Colt W. Knight from South Charleston, WV 25309
(Customer's Reviews) Thursday, November 29, 2012


Copper shielding looks great,even if no one sees it after the guitar is together. This kit by stewmac makes shielding a breeze, and the tape goes a long way.

Good value, works perfectly

By Robdog from Sacramento, CA
(Customer's Reviews) Tuesday, October 23, 2012


Highly recommended. This kit transformed my Strat into a silent, hum-free wonder. Now I can use all of the tones that the guitar has to offer without 60 cycle hum or other interference. Even after shielding a bathtub-rout Strat (including the spring cavity), there's enough tape left for at least one more guitar.

good value 

By prubin from new york, ny
(Customer's Reviews) Thursday, October 11, 2012


Easy to apply (yes, sticks to your fingers). Really eliminates most/all the hum coming from a single coil pickup. Be prepared that the 3/4" roll will provide enough coverage to do a tele and have a tiny bit left over

Gets the job done

By 420four from Toledo, Ohio
(Customer's Reviews) Wednesday, October 10, 2012


This stuff is perfect for what it is designed to do, namely, shield guitar cavities from RFI. Easy to apply after you get the hang of separating it from it's backing. I like it because it has conductive adhesive which makes the job easy to do with no soldering. I used it to shield my 1988 Gibson/Epiphone Nouveau Spotlight which I recently repaired and modified to make it a player again. I even covered the EMG Select pups with the stuff. It looks awesome and couldn't get much quieter. Then I bought another roll to shield my new SX Furrian that I'm turning into the guitar that I've always wanted in a Telecaster Style. SWEET!

Works great and fairly easy to install

By luthiernewbie from usa
(Customer's Reviews) Tuesday, October 09, 2012


Was surprised how easy this was to use. Completely shielded my new bass (based on Precision) in about 30 minutes. The bass is absolutely noise free..

Works Great!

By Gregg from MN
(Customer's Reviews) Friday, October 05, 2012


This copper tape is easy to apply, conducts well, and looks great. The 3/4" is the most useful for me.

Coperni-strum. 

By Rebel Exile from Edmonton, Alberta, Canada
(Customer's Reviews) Thursday, October 04, 2012


I've used this tape to deaden the hum coming from a Yamaha Pacifica. The tape is extremely easy to use for lining the back of the pickup cover. I'm very happy with the result combined with using the conductive shield paint. Thank you Stew-mac. = ]

Good stuff!

By Bluboibass from Acworth, GA USA
(Customer's Reviews) Tuesday, September 11, 2012


I've used Stewmac's copper tape for many years now, always with great results. It's a great money maker for my shop, and I've had many a happy customer when their previously noisy guitar ended up quieter than a tomb.
Tech tip: you MUST completely enclose all cavities, meaning that there has to be a "lip" over the edge of the cavities to mate with the under-the-pickguard shielding. For very troublesome guitars, it may be necessary to shield the trem cavity/cover as well.
If planned carefully, the shielding acts as a ground buss, allowing most of the stock ground wires to be discarded (e.g.: Strat pot-to-pot ground wires are no longer needed-the pickguard shielding grounds them instead). Any wire can act as an RF antenna, so the less length of wire under the hood, the better.
My only complaint (Are you listening guys? Another reviewer mentioned this as well.) is that the thickness of the tape and the backing has gotten much flimsier recently.

Tape is good.

By Dingobass from Perth, Australia
(Customer's Reviews) Tuesday, July 31, 2012


Easy to use, does a great job. No more hum!

Efficient and pratical

By Elbio Joel Matte from Porto Alegre, RS Brazil
(Customer's Reviews) Monday, July 23, 2012


I use a lot and have a great result. Recommended.

Displaying 4 of 12
1 2 3 4 5 6 7 8 9 10 11 12


Shown on page 50 of our latest catalog.