Close

Conductive Copper Tape

5.0
  • 137 Reviews
  • Write a review
Conductive Copper Tape 2"  wide

2" wide

Item # 0028
In stock, ready to ship!

$19.39

+
Conductive Copper Tape 3/4" wide

3/4" wide

Item # 0037
In stock, ready to ship!

$12.69

+
Conductive Copper Tape 1/4" wide

1/4" wide

Item # 0036
In stock, ready to ship!

$4.62

+
Conductive Copper Tape, Set of 3

Set of 3

Item # 0038
In stock, ready to ship!

List Price $36.70
Your Price $32.66

+
 
Total:
Qty:
Scroll to Top

Conductive Copper Tape

About This Item

Get rid of buzz and interference in your guitar.
Shield pickups and control cavities with this self-adhesive copper tape.

180" rolls for shielding pickups and control cavities to reduce hum, noise and radio interference. The self-adhesive backing is also conductive, so overlapped seams are electrically continuous. Wrap this tape around pickup coils for additional shielding.

Sold individually or SAVE when you buy the set of all three widths.

Conductive Copper Tape surface accepts solder.

Item Width Thickness Length
#0028 2" (50.80mm) .00125" (0.076mm, 1.25 mil) 180" (4.57m)
#0037 3/4" (19.05mm) .00125" (0.076mm, 1.25 mil) 180" (4.57m)
#0036 1/4" (6.35mm) .00125" (0.076mm, 1.25 mil) 180" (4.57m)

For quicker shielding in small, hard to reach areas, use our Conductive Shielding Paint. Also available: our Shielding Kit contains the materials for shielding one guitar.


Trade Secrets!

Trade Secrets!

Single-coil buzzkill: the why and how of electric guitar shielding.

Erick Coleman talks about the causes of buzzes and electrical noise, and how to beat them.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.90 average rating from 137 reviews
Sort by
3.0

ok product

By
(Customer's Reviews)


works ok but tricky to use.

5.0

copper tape

By
(Customer's Reviews)


works great but not so easy to use.

5.0

Not that hard to do

By
(Customer's Reviews)


This was for my first attempt at building a guitar. I have a beautiful Warmoth Tele body and I had very little trouble putting this stuff in. I made wooden "plugs" in the shape of the cavities but about 1/8 of an inch smaller to wrap the bottom piece of tape around to pre-form them before trying to install them. I recommend getting all three sizes as I did use some of each.

5.0

Shhhhhh!

By
(Customer's Reviews)


You can really quiet the electronics down by shielding, and this tape does the job. It's pretty sticky, so it will adhere to any finished surface, and even some unfinished ones.

5.0

Buzz be Gone!

By
(Customer's Reviews)


I bought this copper to take care of a buzz in a new guitar. I watched the video and installed it as shown in the video. Put everything back together. Plays better than ever. No buzz! Well worth the price and effort. Be sure to make overlapping strips maintain continuity.

5.0

Noise free single coils.

By
(Customer's Reviews)


This conductive copper tape on the backside of the pickguard along with conductive paint in the cavities will make your single coils virtually noise free. Great product have some in the shop at all times.

5.0

Copper tape

By
(Customer's Reviews)


Great stuff for lining electronic chambers in electric guitars....consistently under 1 ohm!

5.0

Nice stuff.

By
(Customer's Reviews)


I bought this for my guitars from France and received two days after my purchase.

Serious and faster purchase.
Quality stuff.

I recommend this.

Cheers from France.

5.0

Great Noise Canceller

By
(Customer's Reviews)


I bought this for my 2010 P-bass. Noisy as can be (C'mon Fender, get it together. This is the second Fender that was almost unplayable due to hum and buzz). I didn't give up on this one and decided to shield the electronics and p-up cavities. BAM! Now essentially noiseless. A LITTLE but remains at super high volume, but this tape works magic. If you own a Fender, odds are it isn't shielded. 2 hours work and you will fall in love with your bass all over again! Highly recommended!

5.0

GREAT STUFF!

By
(Customer's Reviews)


I had an annoying 60Hz hum in one of my Blues Junior amps mounted in a Mojotone pine cab. I lined the inside back panel and inside the top and sides of the cab with this stuff. The amp is now quiet as a church mouse. I just ordered two more rolls for my guitars (I have several, yes, I have G.A.S.). This tape is GREAT STUFF! And, as always, StewMac's service was top notch...my order was received in two days.

Showing 10 of 137 Read more reviews >>


StewMac PDF Catalog, page 52 See Conductive Copper Tape
on page 52 of our StewMac Catalog PDF

12MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.