Rich acoustic tone from a Tune-o-matic style bridge!
Each saddle has a built-in high-output piezo pickup.
Circuitry is supplied to send the output from the pickups as a mono signal to a stereo output jack, with a separate volume control for the acoustic sound.
This Nashville-style bridge has 2-1/16" string spread, and includes threaded mounting studs and bushings (2-15/16" post spacing).
- Instructions included.
- The Baggs Control-X Mixer/Preamp can be used to blend the T-Bridge signal with the guitar's magnetic pickups in mono.
- We recommend the Stereo Y Cable to allow the two signals from the guitar to be routed to two separate amplifiers or channels.
About bridge & tailpiece measurements
String spread is the distance between the centers of the outer strings on a bridge or tailpiece.
Saddle radius determines the arc formed by all the individual saddle heights, and is similar to the measurement of a fretboard.
Stud/post spacing is the distance between the centers of the mounting posts of a bridge or 'stop' tailpiece.
Positioning the bridge
Find bridge placement for any scale with our free online tool fret position calculator.
Tip: Slotting Tune-o-matic style saddles
Nut slotting files work great for metal saddles. Choose your file size as you would when slotting a nut: use the same gauge as the string, or a few thousandths larger. After filing to the desired depth, we suggest polishing the slot with Mitchell's Abrasive Cord to remove file marks and burrs.