Close

P-90 Mounting Screws for Solidbody

5.0
  • 7 Reviews
  • Write a review
Buy more, save more!

P-90 Mounting Screws for Solidbody

Item # 3360
In stock, ready to ship!

$1.05

6 or more $0.76
 
Total:
Qty:
Scroll to Top

P-90 Mounting Screws for Solidbody

About This Item

Set of 2 Phillips roundhead screws and 1" (25.4mm) springs for mounting a P-90 pickup to a solidbody.

Screws are 1-3/8" (34.93mm) long, threaded portion is 7/8" (22.22mm).

We recommend a 3/32" pilot hole.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.71 average rating from 7 reviews
Sort by
5.0

Perfect match for factory hardware...

By

Verified Buyer


I recently purchased an Epi ES 339 P90 Pro as an open box item... got a great price, but found that the neck pickup had been remounted with shorter black screws and surgical tubing... these matched the factory hardware on the bridge pickup exactly and allowed me to raise the pickup to the height that I wanted...

5.0

Exactly what i needed.

By

Verified Buyer


Two screws, two springs. No more, no less. That's all I needed.

5.0

All I needed

By

Verified Buyer


Correct size, and springs were long enough to trim to whatever length I need!

4.0

Worked in a pinch on a Jazzmaster project

By

Verified Buyer


I believe these are a little thicker (or at least the heads are larger) than Jazzmaster pickup mounting screws, but worked just as well for me for that purpose. The springs, obviously weren't needed.

Be sure to use the proper pilot hole bit! Otherwise the nickel heads will strip in a heartbeat.

5.0

Squire Cabronita Fix

By

Verified Buyer


Wanted to give more of a heads up than a review--if anyone else has purchased a Fender Squire Cabronita and would like to get more height pickup adjustment-these work perfectly--a little trimming to the spring and now i can raise or lower the Fidelitrons.

5.0

P 90 Mounting screws with springs

By

Verified Buyer


This product it just what you need if you want the correct style screw. The springs work out great, you really need to rout your pickups to the correct depth or you could run out of room to sink the pickup into the body. I got lucky and guessed on the depth but if I had to make any changes it would be to have two choices of spring length. If you go by plans, you will not have an issue. I built from memory but I do suggest plans! Bottom line great product!!

4.0

Great screws but...

By

Verified Buyer


Really nice screws, right fit and vintage look. Well made too but I still can't figure out why they're chrome instead of nickel. Oh well, still very nice.