Oak Grigsby 4-way 2-pole Lever Switch

  • 4 Reviews
  • Write a review

A popular mod for Tele®!
Adds a fourth "fat tone" selection.

Read more

Oak Grigsby 4-way 2-pole Lever Switch

Item # 2002
In stock, ready to ship!


6 or more $13.21
Quantity Discount Prices apply when you buy multiples of the same item number.
Total: $0.00
Quantity: 20


A popular mod for Tele®!
Adds a fourth "fat tone" selection.

Along with the three standard pickup selection positions (bridge / bridge+neck / neck), it adds a fourth position that combines the bridge and neck pickups in series, for a fatter tone. Black "barrel" and "top-hat" knobs, mounting screws and wiring diagram included.


Body cavity depth required 1-7/16" (36.51mm)
Mounting screw spacing 1-5/8" (41.28mm)
Lever stem .050" x .190" (1.27mm x 4.82mm)
Pickguard slot required 1/16" x 1-1/16" (1.59mm x 26.99mm) (for the lever)

Product Instructions

Oak Grigsby 4-way 2-pole Lever Switch Instructions

Installation and wiring diagram for the Oak Grigsby 4-Way 2-pole Lever Switch.

Ratings & Reviews

Oak Grigsby 4-way 2-pole Lever Switch

  • Based on 4 Reviews
Write a review

Must have item.

By Rude Rock'n'roll Pups from Johannesburg South Africa
(Customer's Reviews) Monday, October 28, 2013

I just installed one on a customer's Squier Classic Vibe Tele, which already had some hot hand-wound pickups fitted. All I can say is, position 4 TOTALLY KILLS! 2 singles in series sounds like one huge, warm humbucker. This should be the first mod to any Tele. And while you're at it, drop a few dollars on some compensated saddles, also highly recommended, although I did end up putting some grooves in to stop the strings slipping sideways...

4 way switch

By Wasabifiend from Minneapolis, MN USA
(Customer's Reviews) Wednesday, October 16, 2013

It worked well, even came with both handles. Gives a 4th tone to an already great guitar. The directions were ok, wiring diagrams accurate. My favorite Tele mod!

This thing is great!

By Smurfdaddydog from Lafayette, La
(Customer's Reviews) Tuesday, October 08, 2013

I have used this switch in Teles, Strats, even a 7 string. If you are a clever sort you can use wiring diagrams found on the net and your brain to figure out how to wire anything. For example, you could run two humbuckers to their own 3 way mini toggles and wire them for series/split/parallel. Then run those wires from the mini toggles to the 4 way. You could even add a push/pull for phase. It works great with a triple shot. If you put in the effort, you can really do anything with this switch. It even works on a Tele.

Poor instructions, no optional wiring diagrams

By Buffalo Bill from New Buffalo, MI
(Customer's Reviews) Friday, October 04, 2013

I wanted to put this in a guitar with 2 tone and volume knobs, but the instructions are only for the Telecaster, nothing else. Had to give up and use a standard 3 way plus a DPDT switch.

Shown on page 51 of our latest catalog.
  • Telecaster®, Tele®, and Esquire® are registered trademarks of Fender Musical Instruments Corporation.