Alpha Push-pull Pots

5.0
  • 61 Reviews
  • Write a review
Buy more, save more!
Alpha Push-pull Pots 250K-ohm

250K-ohm

Item # 1215
In stock, ready to ship!

$8.98

6 or more $7.81
12 or more $6.73
+
Alpha Push-pull Pots 500K-ohm

500K-ohm

Item # 1216
In stock, ready to ship!

$8.98

6 or more $7.81
12 or more $6.73
+
Alpha Push-pull Pots 500K-ohm, long shaft pot

500K-ohm, long shaft pot

Item # 1213
In stock, ready to ship!

$8.98

6 or more $7.81
12 or more $6.73
+
 
Total:
Qty:
Scroll to Top

Alpha Push-pull Pots

Dual-function pots pull up to activate an on/on double-pole double-throw mini switch.

Can be used as a normal volume or tone control, or control pickup phasing, series/parallel switching, coil-taps, and more.

#1215 250K-ohm

Shaft diameter 6mm split shaft, coarse knurling
Thread  
M7 x 0.75
Threaded portion height  
3/8"
(9.52mm)
Required mounting hole diameter  
9/32"
(7.14mm)
Required body cavity depth  
1-1/8"
(28.58mm)
Two mounting nuts, flat washer and lock washer included


#1216 500K-ohm
Shaft diameter 6mm split shaft, coarse knurling
Thread  
M7 x 0.75
Threaded portion height  
3/8"
(9.52mm)
Required mounting hole diameter  
9/32"
(7.14mm)
Required body cavity depth  
1-1/8"
(28.58mm)
Two mounting nuts, flat washer and lock washer included


#1213 500K-ohm,long shaft pot for Les Paul®
Shaft diameter 6mm split shaft, coarse knurling
Thread  
3/8 x 32
Threaded portion height  
3/4"
(19.05mm)
Required mounting hole diameter  
3/8"
(9.52mm)
Required body cavity depth  
1-1/8"
(28.58mm)
Two mounting nuts, flat washer and lock washer included


250K vs. 500K
Generally, 500K-ohm pots are used with humbuckers and 250Ks are used with single-coil pickups. You can use any value you like, but a 250K will give a slightly warmer tone than a 500K pot. The 250K pot bleeds off some of the high frequencies to ground. A 1 Meg-ohm pot bleeds off even less than a 500K pot, so if you want to hear your guitar "wide open" you may want to try one.

1-meg pots are also ideal for piezo pickups, as the ultra high impedance piezo element is more adversely effected by conventional, lower-value pots than magnetic pickups.

We also have a full line of control pots for non-active circuitry. Extra mounting nuts and lock washers are also available.

To see the knobs available for these pots, click here.


Trade Secrets!

Simple guitar wiring: DIY mods to expand your guitar's tone

Erick Coleman shares some tips for modifying your guitar wiring: easy mods that give you a new tonal range.

Customer Reviews

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
Write a review
5.0
  • 4.74 average rating from 61 reviews
Sort by
4.0

Good Push-Pull Pots

By
(Customer's Reviews)


These are good pots if you need a push-pull. I ordered 4 for my Epiphone Les Paul Plus top (2012)so I could get more sounds out of my new pickups and they work great. I like the feel of them and the switches feel solid. Just a warning to owners of recent Epi Les Pauls, you will have to open your holes slightly for these to fit. It doesn't take much. I couldn't find a hand held reamer locally but I was able to find a step bit for a drill which also fit my screwdriver (the kind with changeable bits)and I used it that way so I could still do it by hand without resorting to using a drill. You aren't removing enough material to need a drill, just a few turns of the step bit opened the hole enough for the new pots to fit. One of the 4 measured a little low on my meter, but the other 3 were very close to 500K.

5.0

The real deal.

By
(Customer's Reviews)


I recently bought what were supposedly Alpha pots from another supplier and they were scratchy, noisy junk. Bought these from StewMac and they are fantastic. Completely smooth and quiet.

5.0

Good for imports

By
(Customer's Reviews)


No need to drill or ream when you can get the pots that fit. Alpha pots are good quality and make the job easier if your replacing originals.

Showing 3 of 61 Read more reviews >>


Shown on page 54 of our latest catalog.