Close

White/b/w Laminated Pickguard Materials

5.0
  • 9 Reviews
  • Write a review
Buy more, save more!

White/b/w Laminated Pickguard Materials

Item # 1039
In stock, ready to ship!

$16.20

3 or more $14.42
+
 
Total:
Qty:
Scroll to Top

White/b/w Laminated Pickguard Materials

About This Item

Traditional white/black/white 3-ply laminated pickguard material for making replacement and custom pickguards and coverplates.

Rectangular PVC gloss-surface plastic sheets.

0.106" thick, 11-1/4" x 19-1/8" (2.7mm x 285mm x 485mm)


Instructions

Product Instructions

Cutting Custom Pickguards with the Pickguard Bevel Cutter

How to cut and bevel custom pickguards with the Pickguard Bevel Cutter.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 5.00 average rating from 9 reviews
Sort by
5.0

Excellent for replacement pickguard

By
(Customer's Reviews)


I bought this material to make a replacement pickguard for my 70's era Strat. The old one had been hacked up to install a humbucker in the bridge section. The material was easy to work and showed no inclination to crack or chip while being sawn, filed, routed, or sanded. It has a protective film over the glossy side which works well. All in all a very nice product and price with enough for to should you screw one up.

5.0

Pickguards

By
(Customer's Reviews)


Great material for multiple pickguards. It routed well and finished off with a good fine edge.

5.0

Good stuff

By
(Customer's Reviews)


Making your own pickguard is not the easiest thing in the world. Get a feel for the material by working on some scrap, and don't be discouraged if you blow your first try. If you want one pickguard, get enough material for two. Here's a hint: don't be afraid to break out the hand file. Keep the router away from sharp corners and other weak spots where it might grab and destroy your piece - do those by hand. This is nice thick material, equivalent to factory. Custom Stratocaster & Jazzmaster

5.0

WBW pickguard material

By
(Customer's Reviews)


This pickguard makes large pickguards or several small guards. With a beveling router bit you can make a beautiful guard that will dress up that next project.

5.0

White pickguard material

By
(Customer's Reviews)


I needed a new pickguard for my Firebird VII. A used pickguard was too costly so I bought some of this material which was of the same thickness. Works great and looks even better!

5.0

Pickguard Material

By
(Customer's Reviews)


In the process of restoring a 68'Mosrite Celebrity.The W/B/W material matched great !!Cut new control plate and pickguard , Looks like the original stuff ! THANKS !!!

5.0

White pick guard material

By
(Customer's Reviews)


Excellent material, made a new guard for my flying V and it came out beautifully.

5.0

Very Nice Material

By
(Customer's Reviews)


Once I figured out that I had to move the material against the spin of the router bit, it cut/beveled just fine. I will use the material again for my next project.

5.0

W/B/W  pickguard Material

By
(Customer's Reviews)


I have used this product several times in the recent past and find it to be high quality , very affordable and very easy to work with . It's surface is very resiliant to pick marks and maintains a very nice gloss over time . My customers are very satisfied with the results and I will continue to use StewMac pick guard material as well as other fine products



StewMac PDF Catalog, page 39 See White/b/w Laminated Pickguard Materials
on page 39 of our StewMac Catalog PDF

13MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.