Stewart-MacDonald Epoxy

4.0
  • 25 Reviews
  • Write a review
Stewart-MacDonald Epoxy Fast setting, clear

Fast setting, clear

Item # 5173
In stock, ready to ship!

$9.83

+
Stewart-MacDonald Epoxy Slow setting, clear

Slow setting, clear

Item # 5174
In stock, ready to ship!

$9.83

+
Stewart-MacDonald Epoxy Slow setting, black

Slow setting, black

Item # 5179-B
In stock, ready to ship!

$15.49

+
 
Total:
Qty:
Scroll to Top

Stewart-MacDonald Epoxy

Gap-filling epoxies for permanent bonds. Our high-strength 2-part adhesives are activated when their resin and hardener components are mixed in equal parts.

Each 4-ounce set has two 2-ounce bottles, ready for mixing.

Fast-setting mixture has 5-minute working time. Full bond strength in one hour.

Slow-setting mixture allows 20 minute working time. Full bond strength in 8 hours, for a rigid waterproof joint.

Slow-setting black mixture is great for inlaying ebony fingerboards. 20 minute working time. Wait 3 days before sanding.

Note: With all epoxies, the slower the setting time, the stronger the bond.

Use adequate ventilation and avoid skin and eye contact.

Keep out of the reach of children.


Trade Secrets!

Coloring epoxy for guitar inlays

A little bit of glue hides imperfections... Dan Erlewine personalizes a fretboard with the customer's name in pearl: "Hoss." There are small gaps around the inlays, and dan shows how to make those gaps disappear. Dan also shows a neat magnet trick for cutting thin slices off the end of a fretboard.

Customer Reviews

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
Write a review
4.0
  • 4.24 average rating from 25 reviews
Sort by
Displaying 3 of 3 1 2 3
5.0

Strong bonding stuff!

By
(Customer's Reviews)


I ordered the slow setting clear epoxy to hold a couple carbon fiber rods in place in a guitar neck, and the stuff works great. It has a viscosity similar to that of honey or syrup, so it was easily spread to cover the entire cavity without flowing back to one end or the other.

A word of advice though... Be sure to use in WELL VENTILATED areas!!! the resin was not so bad but the hardener is one of the most foul smelling chemicals I've ever came across. It does dry scent free though :)

5.0

;)

By
(Customer's Reviews)


Excellent quality!!!

5.0

StewMac Epoxy

By
(Customer's Reviews)


I've used this product for five years with excellent results. I like the slow setting time which allows for proper alignment of parts for clamping. I haven't noticed any shrinkage with it and it never has de-laminated.

5.0

Can cover up mistakes

By
(Customer's Reviews)


I bought this epoxy so I could glue in the inlays I made for my ebony finger board. Well, this was my first time doing it and i was a little careless and my hands slipped making the cavity much larger than it needed to be. I glued in the inlay and after the epoxy dried and the inlay was sanded flush the mistake isn't even noticeable. (I used the slow setting black by the way)

5.0

Great product

By
(Customer's Reviews)


I have used many epoxies over the years. From the smallest of jobs to installing sledge hammer handles and this is some of the best I've used.

Displaying 3 of 3
1 2 3


Shown on page 44 of our latest catalog.