Close

ColorTone Aerosol Guitar Lacquer

4.5
  • 159 Reviews
  • Write a review
ColorTone Aerosol Guitar Lacquer Clear Gloss

Clear Gloss

Item # 3881
In stock, ready to ship!

$13.70

3 or more $12.19
+
ColorTone Aerosol Guitar Lacquer Clear Satin

Clear Satin

Item # 3882
In stock, ready to ship!

$13.70

3 or more $12.19
+
ColorTone Aerosol Guitar Lacquer Clear Sanding Sealer

Clear Sanding Sealer

Item # 3883
In stock, ready to ship!

$13.70

3 or more $12.19
+
 
Total:
Qty:
Scroll to Top

ColorTone Aerosol Guitar Lacquer

About This Item

The easiest way to spray a professional finish!
Produces a beautiful traditional nitrocellulose lacquer finish, without elaborate spray equipment.

ColorTone® Clear Aerosol Guitar Lacquer is formulated especially for musical instruments. Fast-drying and resistant to alcohol and water, it produces a hard, durable finish that enhances the beauty of the wood.

Available in convenient 13-ounce spray cans.

ColorTone® Nitrocellulose Guitar Lacquer can be applied over smooth bare wood, sanded basecoats of grain filler, ColorTone Sanding Sealer, and over ColorTone Stains. Perfect for touch-up work, or for finishing an entire instrument. The rotating-tip nozzle can spray a horizontal or vertical pattern.

Aerosol spraying is an economical way for the beginner to apply a first finish without elaborate setup or equipment. Aerosols produce a slightly rougher surface than spray guns, however, and more sanding may be needed for a level surface.


How many cans do you need?

  • Electric guitar neck: No sealer, 2 to 3 cans lacquer
  • Solid body electric: 1 can sealer, 3 to 4 cans lacquer
  • Acoustic or archtop guitar: 1 can sealer, 4 to 6 cans lacquer
  • Mandolin or dulcimer: 1 can sealer, 3 to 4 cans lacquer
  • Banjo rim and neck: 1 can sealer, 3 to 4 cans lacquer
  • Ukulele: 1 can sealer, 2 to 3 cans lacquer

Number of cans needed may vary depending on how heavy the coats are applied, number of coats, and desired thickness on your instrument.

Clear Satin typically requires fewer coats. Successive thin coats should be sanded to maintain a level surface. Don't sand the final coat; the flattener in the lacquer will give a smooth satin appearance.


Application Tips

We recommend spraying multiple thin coats, in a low humidity environment. Heavy-bodied Sanding Sealer (one coat equals two coats of lacquer) will seal stained or unstained wood before the color coats or clear topcoats are applied. At least one can of Sanding Sealer and 4-6 cans of lacquer will usually finish a complete guitar.

Use warm lacquer, not cold!
Pro shops spray heated lacquer because cold lacquer spatters, requiring extra sanding. You should warm up your aerosol lacquer too, simply soak them in a sink of warm tap water.


Our ColorTone Aerosol Finishing Kit is a great choice for the first-time instrument maker. It includes our easy-to-apply clear gloss aerosol finish with the best instruction book available!

California Residents: Click here for Proposition 65 information.

Trade Secrets!

Trade Secrets!

How to spray a sunburst using aerosol cans

Erick Coleman uses tinted aerosols to recreate a vintage Strat 3-tone 'burst.

Instructions

Product Instructions

ColorTone Aerosol Guitar Lacquers

Application instructions for ColorTone Aerosol Guitar Lacquers.

Nitrocellulose Finishing Schedule

A step-by-step flow chart of nitrocellulose finishing.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.58 average rating from 159 reviews
Sort by
5.0

Great experience great product

By
(Customer's Reviews)


Works exactly as it should. Easy application with minimal chance of runs and very little orange peel for easy buffing.

5.0

Easy to use, great result

By
(Customer's Reviews)


Stained and used the satin lacquer on a mahogany Ibanez AXS32, used the satin, really brought out the wood grains, and provided a beautiful finish. Used 8 thin coats

5.0

Great stuff!

By
(Customer's Reviews)


Neck on my cigar box guitar looks and feels awesome!

Showing 3 of 159 Read more reviews >>


StewMac PDF Catalog, page 40 See ColorTone Aerosol Guitar Lacquer
on page 40 of our StewMac Catalog PDF

12MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.



  • ColorTone® is a registered trademark of Stewart-MacDonald Manufacturing Company, Inc.