Behlen Nitrocellulose Vinyl Sealer, 1 quart

  • 8 Reviews
  • Write a review

The compatible base for Behlen Stringed Instrument Lacquer, with better adhesion than conventional sealers.

Read more

Behlen Nitrocellulose Vinyl Sealer, 1 quart

Item # 4843
In stock, ready to ship!


4 or more $17.52
Quantity Discount Prices apply when you buy multiples of the same item number.
Total: $0.00
Quantity: 20

Ratings & Reviews

Behlen Nitrocellulose Vinyl Sealer, 1 quart

  • Based on 8 Reviews
Write a review

Behlen Nitrocellulose Vinyl Sealer

By Dan Carey from RI
(Customer's Reviews) Sunday, March 09, 2014

VERY easy to apply and forgiving. I brushed the first thin coat on expecting to have a lot of sanding to do afterward...WRONG! On drip was all that I had and sanding was a breeze. Second coat was reduced 50-50 and sprayed on. Easy as pie and no runs on my fiddle. One more coat after I do the inlays and I'll be ready for my Behlen lacquer finish

 Behlen Nitrocellulose Vinyl Sealer

By Tstrongarm from Dothan, AL
(Customer's Reviews) Friday, February 28, 2014

After i started using a decent compressor, the stuff was brilliant. Thinned it 50-50. Before that it looked like I blew snot all over the guitar...

Expensive good stuff.

By musicmont from USA
(Customer's Reviews) Saturday, February 15, 2014

Good but expensive with shipping.


By CWaggs from Illinois
(Customer's Reviews) Monday, September 24, 2012

Haven't quite figured this stuff out, but it seems to work fine as a prep/primer under the stringed instrument nitro.

vinyl sealer

By george h from old dominion
(Customer's Reviews) Wednesday, February 08, 2012

Not a drip run or error, really straight forward product. Used three coats after grain plugging, with a nitro topcoat. A northern ash strat body and all is good. This sealer was smooth and did real well for me.

Great Finishing Supplies!

By Wilmer Gingerich from Jamesport MO
(Customer's Reviews) Saturday, December 17, 2011

Great product from Behlen! Doesn't need thinning either.

 Best vinyl sealer

By Randall Angella from Concord Ca.
(Customer's Reviews) Tuesday, November 01, 2011

This material is the best sealer I've ever used. It goes on nicely and will sand to a powder in a half hour. The shrink rate is very modest. When laid on, then wet sanded after an hour, it will generally fill the grain. Another light coat and the guitar is ready for lacquer. Care must be taken to tumble the can gently by hand to disperse the solids and not introduce bubbles.

Behlen Vinyl Sealer is Awesome!

By Darrin DeJohn from Mandeville, La. USA
(Customer's Reviews) Tuesday, April 19, 2011

I just used the Behlen Vinyl Sealer for the first time and absolutely love it. I will never finish another guitar or neck without it. The product sprayed on perfect and gave my necks a great feel. I also used it as a base coat for the nitrocellulose finish on my guitar bodies and I was equally pleased. All luthiers should try this product. Happy building!

Shown on page 38 of our latest catalog.