Close

Slotted Fingerboard for Fender Guitar

4.5
  • 54 Reviews
  • Write a review
Slotted Fingerboard for Fender Guitar Ebony

Ebony

Item # 1062
In stock, ready to ship!

$52.00

+
Slotted Fingerboard for Fender Guitar Maple

Maple

Item # 1062-M
In stock, ready to ship!

$16.69

+
Slotted Fingerboard for Fender Guitar Rosewood

Rosewood

Item # 1062-R
In stock, ready to ship!

$29.10

+
 
Total:
Qty:
Scroll to Top

Slotted Fingerboard for Fender Guitar

About This Item

25.5" scale • 12" radius • 24 slots + nut slot
Each fingerboard is radiused and extended to include a 1/8" flat-bottomed nut slot, Fender style.

Tip: Saw the fingerboard shorter at the 2nd fret (at the nut end) to install it on a Gibson 22-3/4" short scale guitar.

Our kiln-dried fingerboards have flat undersides, are unfretted (no inlays), and ready for trimming to fit a variety of neck widths.

Approximate dimensions: 2-3/8" x 20-3/8" x 15/64" (60.32mm x 517.53mm x 5.95mm)
Radius: 12" (304.80mm)
Fret slots: 24 slots, 0.023" wide (0.58mm). Ready to accept our fretwire.
Nut slot: 1/8" wide (3.18mm)

Important:
Ebony is usually not uniformly black.
We offer Black Fingerboard Stain, as used by Gibson®, Paul Reed Smith® and other makers for darkening the streaks on ebony fingerboards, bridges and peghead overlays.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.65 average rating from 54 reviews
Sort by
5.0

Maple board

By

Verified Buyer


First time buy, very nice.

5.0

Good looking and consistent quality.

By

Verified Buyer


I have used several of these boards with no issues. You do need to final sand the radius for perfection but that is expected.

5.0

Picked up for a little project.

By

Verified Buyer


Got this for a Tele that had a fretboard that looked like it had been used by a luthier training camp too many times. The fret board was perfectly flat and ready to be mounted. I did do a little sanding to make sure the glue would set up nicely. After I let it set a few days, I trimmed the excess and shaped the fret board. I haven’t done anymore at this point but I’m happy with the fretboard I got!

5.0

slotted fingerboard

By

Verified Buyer


this fingerboard will work fine for a cutaway acoustic I am building. It has the scale length I am looking for

5.0

Fantastic fretboard

By

Verified Buyer


I bought the rosewood fretboard and asked if StewMac could send me a nice dark one in the comments, and they did just that. It looks amazing and the frets went in with no problem. I'll certainly be purchasing more slotted boards in the future.

5.0

Slotted fingerboard

By

Verified Buyer


Perfect!

5.0

1987 kramer baretta neck. 

By

Verified Buyer


Replacing tross rod, fingerboard ,and Dots

5.0

I Bought This For A Neck Build...

By

Verified Buyer


I got this fretboard for building a two-piece neck. It is a very pretty piece of wood that is working great for my purposes.

5.0

Excellent Quatity - Good Value

By

Verified Buyer


These replacement fret boards are great. High quality materials, precision fret slots, and perfectly radiused. While we can make these in our shop, it's cheaper - and easier - to buy these pre-made. I just used a 25" flat rosewood fret board on a 1936 Regal resonator restoration, and it looks great. Stew Mac is our go-to for tools and materials.

5.0

Flawless

By

Verified Buyer


This fretboard is flawless.. perfect for the accurate at home build. My whole class uses these, and never had a problem!

Showing 10 of 54 Read more reviews >>


StewMac PDF Catalog, page 79 See Slotted Fingerboard for Fender Guitar
on page 79 of our StewMac Digital Catalog