Shaped, inlaid, fretted and finished - feels and plays great! Hard rock maple finished in clear satin polyurethane, with a walnut "skunk stripe" down the back.
The 20 frets are nicely finished, and the nut is shaped and slotted. Maple or rosewood fretboard with dot inlays and side markers.
Screwholes for attaching to the body are not drilled. Each neck has a truss rod with a 4mm adjusting nut at the peghead. We recommend Allen Truss Rod Wrench for adjusting neck relief.
The 23/32"-diameter pegholes fit our Adjustable Tension Bass Tuners.
|Scale length||34" (863.60mm)|
|Width at nut||1-5/8" (41.28mm)|
|Width at 20th fret||2-1/2" (63.50mm)|
|Fretboard radius||9-1/2" (241.30mm)|
|Fretwire|| .042" high x .105" wide (1.07mm x 2.67mm)|
Neck thickness (approximate; not including fret)