Replacement Neck for Fender Bass

  • 11 Reviews
  • Write a review

Shaped, inlaid, fretted and finished - feels and plays great! Hard rock maple finished in clear satin polyurethane, with a walnut "skunk stripe" down the back.

Read more
Replacement Neck for Fender Bass Rosewood fingerboard

Rosewood fingerboard

Item # 5721
In stock, ready to ship!


Replacement Neck for Fender Bass Maple fingerboard

Maple fingerboard

Item # 5722
In stock, ready to ship!


Total: $0.00
Quantity: 20


Shaped, inlaid, fretted and finished - feels and plays great! Hard rock maple finished in clear satin polyurethane, with a walnut "skunk stripe" down the back.

The 20 frets are nicely finished, and the nut is shaped and slotted. Maple or rosewood fretboard with dot inlays and side markers.

Screwholes for attaching to the body are not drilled. Each neck has a truss rod with a 4mm adjusting nut at the peghead. We recommend Allen Truss Rod Wrench for adjusting neck relief.

The 23/32"-diameter pegholes fit our Adjustable Tension Bass Tuners.

More specifications:
Scale length 34" (863.60mm)
Width at nut 1-5/8" (41.28mm)
Width at 20th fret 2-1/2" (63.50mm)
Fretboard radius 9-1/2" (241.30mm)
Fretwire .042" high x .105" wide (1.07mm x 2.67mm)

Neck thickness (approximate; not including fret)

Ratings & Reviews

Replacement Neck for Fender Bass

  • Based on 11 Reviews
Displaying 1 of 2 1 2
Write a review


By Bassplayr94 from Perth, Western Australia
(Customer's Reviews) Tuesday, January 07, 2014

Straight as an arrow, solid, feels great. What more could you ask for? The next time i need parts I'll be shopping here.

P-Bass neck

By John gray from Portsmouth England
(Customer's Reviews) Wednesday, June 05, 2013

How quick is this placed order on Monday night uk time got on Wednesday neck fitted and plays like a dream

Fender Jazz Bass tone

By W. Moura from Rio de Janeiro, Brazil
(Customer's Reviews) Friday, May 31, 2013

The neck is amazing, I used it on DIY Jazz Bass to replace a "pau-marfim" one that gives a warmer tone a bit away from that Fender vintage tone I was looking for. Now I've got it! and I have a Precision bass in the same condition just waiting for one of this necks.

5721 neck

By Pascal 64 from France
(Customer's Reviews) Sunday, March 03, 2013

very good quality, I will order more in the future

These necks are great !!!

By alder from NJ USA
(Customer's Reviews) Sunday, February 03, 2013

Mighty-Mite necks are one of the best buys you can find. I have used many of them, and have never had issue with one, as I have had with other inexpensive necks. The heel, the fretwork, overall finish, are all first-rate. They are sealed with a thin layer of poly, you can hardly tell it is there.


By Jago from Swizerland
(Customer's Reviews) Friday, January 25, 2013

Good quality wood and well made. Also the frets are very well made. No need to do any rework on the frets or the nut, just put it on the body, that's it! The neck plays great. I'm absolutely happy with it! You get a perfect neck for the price! Very quick shipping, thanks. Used it for my self made bass guitar.

great replacement neck

By tjrtjr from IL
(Customer's Reviews) Sunday, January 20, 2013

I had a client with a 66 Fender P bass with a twisted neck. It had been repaired with limited success. I suggested this neck as an inexpensive replacement. It worked out better than I suspected. It fit right into the neck opening with minor adjustments. The old bushings needed shimming and then the tuners lined up perfectly. The plastic nut was fine but I replaced it with a bone nut to tweak the sustain. The bass plays like a dream and sounds wonderful. I could have spent four times the money to get the same results. Very nice.

Can't Go Wrong.....

By Sapele Steve from CT
(Customer's Reviews) Saturday, November 05, 2011

Used this Fender neck on a new P Bass build. Even the guy at the Guitar store asked me where I purchased it & thought that it was very well made. I did add a few coats of wipe on Poly to it. Other than that, it was good to go. If you are looking for a quality product, look no further!

Very nice.

By Rodrigo Gomes from Brazil
(Customer's Reviews) Tuesday, September 20, 2011

Very nice, but lacks finishing the edges of the frets, the fitting body is for the Precision Bass, Jazz Bass has to widen to enter.

very nice

By grguitar from grand rapids, mi
(Customer's Reviews) Tuesday, May 24, 2011

great fit. quick install. wee bit of fret sprout, but easily fixed with a few weeks in a more humid environment.

Displaying 1 of 2
1 2

Shown on page 73 of our latest catalog.
  • These necks are made for us by Mighty Mite, and have peghead shapes licensed by Fender.