Close

Slotted Fingerboard for Fender Guitar

4.5
  • 48 Reviews
  • Write a review
Slotted Fingerboard for Fender Guitar Ebony

Ebony

Item # 1062
Due 5-7 days
Email when in stock

$47.62

+
Slotted Fingerboard for Fender Guitar Maple

Maple

Item # 1062-M
In stock, ready to ship!

$15.29

+
Slotted Fingerboard for Fender Guitar Rosewood

Rosewood

Item # 1062-R
Due 5-7 days
Email when in stock

$26.65

+
 
Total:
Qty:
Scroll to Top

Slotted Fingerboard for Fender Guitar

About This Item

25.5" scale • 12" radius • 24 slots + nut slot
Each fingerboard is radiused and extended to include a 1/8" flat-bottomed nut slot, Fender style.

Tip: Saw the fingerboard shorter at the 2nd fret (at the nut end) to install it on a Gibson 22-3/4" short scale guitar.

Our kiln-dried fingerboards have flat undersides, are unfretted (no inlays), and ready for trimming to fit a variety of neck widths.

Approximate dimensions: 2-3/8" x 20-3/8" x 15/64" (60.32mm x 517.53mm x 5.95mm)
Radius: 12" (304.80mm)
Fret slots: 24 slots, 0.023" wide (0.58mm). Ready to accept our fretwire.
Nut slot: 1/8" wide (3.18mm)

Important:
Ebony is usually not uniformly black.
We offer Black Fingerboard Stain, as used by Gibson®, Paul Reed Smith® and other makers for darkening the streaks on ebony fingerboards, bridges and peghead overlays.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.60 average rating from 48 reviews
Sort by
Displaying 4 of 5
1 2 3 4 5
2.0

25.5' Maple slotted fret board

By
(Customer's Reviews)


I purchased a stew-mac 25.5" fret scale with the intention of cutting my own board. After several tries, I found it very difficult to cut the slots dead on. I ordered a stew-mac 25.5" maple slotted fret board. When I compared it with fret scale the slots were slightly off. Stew-mac promptly replaced it with another board. The new board was exactly the same as the first, so you might want to check your board before you glue it down. Of course it could be the scale that is off. I'm still puzzled.

5.0

Well spent investment

By
(Customer's Reviews)


Considering what it takes to make your own fingerboards, these are simply the cheapest way to go at it. I found the rosewood ones to be selected from attractive stocks and plenty thick for sanding. I have occasionally come across boards which didn't have the right radius, perhaps something got mixed-up... Overall, the quality of these fingerboards is top.

5.0

SCALE GOOD

By
(Customer's Reviews)


BOUGHT IN MAPLE SCALE ... PERFECTLY for me to serve ... Thank the staff of STEWMAC .. I WILL ONLY BUY THEM NOW!
OTANIEL - BRAZIL

5.0

good value

By
(Customer's Reviews)


just recieved an ebony fretboard today. the ebony board was excellent for my first build, shame the unslotted boards are more expensive. the wood was perfectly radiused and mostly black

5.0

Great Quality

By
(Customer's Reviews)


I ordered the rosewood fingerboard and couldn't be happier with what I got. The softer wood sands down quickly so just don't rush through cutting and finishing it, or it might turn out too skinny.

4.0

Throat too deep.....

By
(Customer's Reviews)


Yes, la gorge qui acceuille le sillet est trop profonde, legerement, mais c'est suffisant pour etre genant cotT MI grave. C'est le seul reproche, tout le reste it is very good

4.0

Fret Not!

By
(Customer's Reviews)


These fingerboards are cut accurately and the scale is accurate but i must say that the last rosewood board i bought was a little on the "dull" looking side compared to the ones in the past. Other that that,they are well made.

5.0

Outstanding

By
(Customer's Reviews)


i recently ordered two fret boards, one ebony and one rose wood, and the quality was far better i had hoped. the ebony i got was pitch black, there was absolutely no need to stain. highly suggest to anyone.

5.0

great piece of wood! 

By
(Customer's Reviews)


Nice grain, well made. I'll be buying more!

5.0

Ebony was perfect! 

By
(Customer's Reviews)


I was surprised that the ebony finger board was so flat.

Displaying 4 of 5
1 2 3 4 5


StewMac PDF Catalog, page 77 See Slotted Fingerboard for Fender Guitar
on page 77 of our StewMac Catalog PDF

13MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.