Close

Slotted Fingerboard for Fender Guitar

4.5
  • 52 Reviews
  • Write a review
Slotted Fingerboard for Fender Guitar Ebony

Ebony

Item # 1062
In stock, ready to ship!

$50.00

+
Slotted Fingerboard for Fender Guitar Maple

Maple

Item # 1062-M
In stock, ready to ship!

$16.05

+
Slotted Fingerboard for Fender Guitar Rosewood

Rosewood

Item # 1062-R
In stock, ready to ship!

$27.98

+
 
Total:
Qty:
Scroll to Top

Slotted Fingerboard for Fender Guitar

About This Item

25.5" scale • 12" radius • 24 slots + nut slot
Each fingerboard is radiused and extended to include a 1/8" flat-bottomed nut slot, Fender style.

Tip: Saw the fingerboard shorter at the 2nd fret (at the nut end) to install it on a Gibson 22-3/4" short scale guitar.

Our kiln-dried fingerboards have flat undersides, are unfretted (no inlays), and ready for trimming to fit a variety of neck widths.

Approximate dimensions: 2-3/8" x 20-3/8" x 15/64" (60.32mm x 517.53mm x 5.95mm)
Radius: 12" (304.80mm)
Fret slots: 24 slots, 0.023" wide (0.58mm). Ready to accept our fretwire.
Nut slot: 1/8" wide (3.18mm)

Important:
Ebony is usually not uniformly black.
We offer Black Fingerboard Stain, as used by Gibson®, Paul Reed Smith® and other makers for darkening the streaks on ebony fingerboards, bridges and peghead overlays.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.63 average rating from 52 reviews
Sort by
Displaying 3 of 6
1 2 3 4 5 6
4.0

Very good.

By

Verified Buyer


I ordered the Rosewood fingerboard for my first project. It is a beautiful piece of wood, and the slots are perfect. There is a bit of planer chip-out behind the second fret, and it may or may not sand out; if I were building a 2,000-3,000 dollar guitar, it would be an issue, but I'm not, and it won't affect the sound or playability so I don't mind. Not perfect, but probably an outlier

5.0

Slotted fingerboard

By

Verified Buyer


Radius work required but very good quality fingerboard

5.0

Rosewood fingerboard

By

Verified Buyer


I installed 2 fretboards so far, both were excellent quality, but I noticed that one chipped more when routing it. But I had a little worn router bit.

5.0

Excellent fretboard!

By

Verified Buyer


I just finished a new build and for the first time used a pre-slotter, radiused fingerboard. I purchased the rosewood with a 12" radius. It was excellent quality wood and very attractive. There were no blimishes at all, front or back and having it slotted saved me a lot of time and for just over $20 it was more than worth it.

5.0

Ebony fretboard

By

Verified Buyer


Good quality wood, perfect fret slots, work required on the radiused side.

4.0

i had some problems

By

Verified Buyer


unfortunately the item had a cut near the 12th fret on the surface. this is not a thing that could make it a bad quality product, but this shouldn't happen

5.0

perfecto

By

Verified Buyer


Always perfect and a joy to work with. One of the many excellent deal on Stewmac!

5.0

Radius!

By

Verified Buyer


I did not notice that the description of the item states that this is pre radiused. You should make stand out a little bit more.

Besides for that - the measurements are accurate and the wood is of high quality.

4.0

Good stuff!

By

Verified Buyer


I like this maple fingerboard, beautiful and flawless.

5.0

StewMac fretboards

By

Verified Buyer


I have gotten pre-slotted ebony, maple, and rosewood fretboards from StewMac. All were nice pieces of wood, the ebony quite dark and consistent. One ebony board snapped in shipping, and a replacement shipped the same day. Obviously, I would buy from them again. The bit of extra money spent for the slotting and radiusing easily counters the $$ and time that a hobbyist like me would spend on appropriate blades and jigs (esp with ebony).

Displaying 3 of 6
1 2 3 4 5 6


StewMac PDF Catalog, page 79 See Slotted Fingerboard for Fender Guitar
on page 79 of our StewMac Digital Catalog