Slotted Fingerboard for Paul Reed Smith and Dobro Guitars

  • 20 Reviews
  • Write a review

25" scale • 12" radius • 24 slots
Slotted for Paul Reed Smith®, Dobro®, National™ and other 25" scale guitars.

Read more
Slotted Fingerboard for Paul Reed Smith and Dobro Guitars Ebony, radiused

Ebony, radiused

Item # 4655
In stock, ready to ship!

$45.90

+
Slotted Fingerboard for Paul Reed Smith and Dobro Guitars Rosewood, radiused

Rosewood, radiused

Item # 4655-R
In stock, ready to ship!

$21.81

+

Rosewood, flat

Item # 5479-R
In stock, ready to ship!

$20.69

+

Maple, flat

Item # 5479-M
In stock, ready to ship!

$13.65

+
Currency:
Total: $0.00
Quantity: 20

Details

25" scale • 12" radius • 24 slots
Slotted for Paul Reed Smith®, Dobro®, National™ and other 25" scale guitars.

Our kiln-dried fingerboards have flat undersides, are unfretted (no inlays), and ready for trimming to fit a variety of neck widths.

Approximate dimensions: 2-3/8" x 19" (60.32mm x 482.60mm)
Fret slots: 24 slots, 0.023" wide (0.58mm). Ready to accept our fretwire.
Radius boards have 12" radius, and are 15/64" thick (304.80mm radius, 5.95mm thick)
Flat boards are 13/64" thick (5.16mm)

A note about ebony:
Ebony is usually not uniformly black. We offer Black Fingerboard Stain, as used by Gibson, Paul Reed Smith and other makers, for darkening the streaks on ebony fingerboards, bridges and peghead overlays when desired.


Ratings & Reviews

Slotted Fingerboard for Paul Reed Smith and Dobro Guitars

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
  • Based on 20 Reviews
Displaying 2 of 2 1 2
Write a review

Rosewood PRS fboards

By jmonti from SE WI
(Customer's Reviews) Wednesday, November 16, 2011


Just received two f-brds the other day.
Beautiful grain, color, and quality. Really tight, straight grain.
Can't wait to start glueing my necks up...
just outstanding.

Quality of wood changes from board to board.

By Goodson Guitars from Odessa, Tx
(Customer's Reviews) Sunday, July 10, 2011


These boards are good. They speed things up but the quality can vary from board to board.

Spot on!

By agnusguitars from champaign, il
(Customer's Reviews) Friday, June 17, 2011


I received the ebony radiused and slotted which aligned perfect against a pre-printed paper mockup of my neck with the same scale. I also ordered the stewmac fretwire which worked perfectly in the grooves. Ebony was a first for me and cutting it produced chips and chardes vs. splinters.

Hard stuff. Best to use very sharp blades for a super clean cut/edge. I plan on ordering more to finish off my other builds. Thanks!

Perfect !!

By Bill Alvey from Jacksonville, NC
(Customer's Reviews) Saturday, May 21, 2011


I used this fret board on a cigar box guitar I built and it was just perfect !! Gave it some real class and You better believe these cigar box guitars are real instruments and a lot of fun to play !!

Nice Fretboard

By Alex Page from Red Wing, MN
(Customer's Reviews) Thursday, May 12, 2011


The ebony flat fretboard came with very accurately placed slots and was perfectly flat. Wonderful piece. Only complaint is that the slots are too deep for the StewMac fretwire and need to be filled or the fretboard itself needs to be planed down. Otherwise, spectacular. Exactly what was needed.

1956 Gretsch fretboard replacement

By D. Morris from Cowley, Wy
(Customer's Reviews) Sunday, February 06, 2011


The PRS slotted fingerboard from Stew-Mac was perfect for a 1956 Gretsch. This provided exact fret spacing as the original fretboard on this guitar.

Excellent (if you know what your doing)

By Jonah from Buffalo, N.Y.
(Customer's Reviews) Saturday, November 13, 2010


I bought a piece of the maple, and it turned out great (with some light sanding). But I'm a beginner, and I thought this would already be the right size, but I was wrong. So I would only get this fingerboard if you know what you doing! Other than that, great for the price!

Perfect!

By Capu from Switzerland
(Customer's Reviews) Monday, August 23, 2010


I'm used to use StewMac fingerboards (in particular the rosewood ones) and I've alway been very satisfied by their quality. Highly recommended

Maple works great for experienced luthiers

By Richard from Northridge, CA
(Customer's Reviews) Wednesday, August 18, 2010


The maple fingerboard have the appearance of plywood until you sand it down with 600 grit sandpaper and rub in some stain (make sure to keep the slots clear). These work perfectly for me with my weird flat fingerboard guitars. I've already ordered over a dozen and find that the wood quality and precision cuts are consistent throughout.

Mediocre Maple

By Dan McCulloch from California
(Customer's Reviews) Friday, July 16, 2010


The maple boards tend to vary a lot and are "economy" grade at best.

Displaying 2 of 2
1 2


Shown on page 75 of our latest catalog.
  • Dobro® is a registered trademark of Gibson Guitar Corporation
  • National™ is a registered trademark of National Reso-Phonic Company.
  • Paul Reed Smith® and PRS® are trademarks of Paul Reed Smith Guitars.