Dovetailed Acoustic Guitar Neck

3.5
  • 4 Reviews
  • Write a review
Buy more, save more!
Dovetailed Acoustic Guitar Neck 14-fret

14-fret

Item # 1105
In stock, ready to ship!

$150.80

3 or more $134.21
+
Dovetailed Acoustic Guitar Neck 12-fret

12-fret

Item # 1107
In stock, ready to ship!

$165.38

3 or more $147.19
+
 
Total:
Qty:
Scroll to Top

Dovetailed Acoustic Guitar Neck

Save hours of work! Start with these precision machined necks, so you have more time to work on the details that make the guitar your own.

High quality one-piece quartersawn mahogany necks for Martin-style guitars. What's carved for you:

• Tuner holes • Dovetail neck joint
• Truss rod slot • Diamond contour at the peghead base

Matching dovetail neck block sold separately. A short mahogany filler insert is included for truss rod installation. Final sanding and finishing are required.

14-fret neck
With solid peghead for Dreadnought or other acoustic guitar with 14th fret at the body. Each neck is slotted for our Hot Rod Truss Rod (item #2551, 4mm Allen nut, 14-1/4" long).

Peghole diameter 1/4" (6.35mm)
Peghole spacing 1-5/8" (41.27mm)
Width at the nut 1-3/4" (44.45mm)
Width at the body 2-3/16" (55.56mm)
Truss rod slot width 7/32" (5.56mm)
Truss rod slot depth 7/16" (11.11mm)


12-fret neck
With slotted peghead for 0, 00, and 000 (non-Dreadnought) acoustic guitars with 12th fret at the body. A peghead veneer is recommended. Each neck is slotted for our Hot Rod Truss Rod (item #2550, 4mm Allen nut, 12-1/4" long).

Headstock thickness 5/8" (15.87mm)
Peghole diameter 1/4" (6.35mm)
Peghole spacing 1-3/8" (34.92mm)
Width at the nut 1-7/8" (47.62mm)
Width at the body 2-5/16" (58.74mm)
Truss rod slot width 7/32" (5.56mm)
Truss rod slot depth 7/16" (11.11mm)


Also available
The fingerboard, matching neck block, truss rod, peghead veneer and string nut are sold separately.


Customer Reviews

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
Write a review
3.5
  • 3.50 average rating from 4 reviews
Sort by
3.0

12 fret dovetail neck

By
(Customer's Reviews)


Rough finish in all the wrong places, back of headstock, tuner holes appear to have been drilled after slots cut resulting in some chip out. The biggest problem was the nut width was only 46.2 mm rather than specified 47.62mm but managed to get round this one. Plenty of room for improvement, maybe sharpen tools!

4.0

Mahogany 12 fret neck

By
(Customer's Reviews)


A bit rough for the price. I expected a closer tolerance carve. One small imperfection in the wood, but otherwise clear stock.

2.0

BJW

By
(Customer's Reviews)


Not the best quality neck, poorly finished several dents in the back which needed filling,not too happy with this item.

Showing 3 of 4 Read more reviews >>


Shown on page 77 of our latest catalog.