Guitar Tech Screwdriver Set

5.0
  • 136 Reviews
  • Write a review

A drawer full of tools in the palm of your hand!

Read more

Guitar Tech Screwdriver Set

Item # 3000
In stock, ready to ship!

$37.75

+
Currency:
Total: $0.00
Quantity: 20

Video

Guitar Tech Screwdriver Set

StewMac's own: this kit replaces a drawer full of tools!


Subscribe to StewMac's channel on

Details

A drawer full of tools in the palm of your hand!

  • 36-bit set specifically for guitar hardware
  • Compact no-spill case, only 5" long
  • Only at StewMac!

If there's a set of tools every guitar tinkerer will love and use every day in the shop and on tour, this one has gotta be it! A great gift for shopmates, bandmates and guitar collectors.

This set is a must-have! Be ready for practically any hardware on any guitar, from tuners to bridges, tremolos to pickguards, pickups to tailpieces, and more.

The Guitar Tech Screwdriver Set replaces a whole drawer full of tools. We've included 36 essential bits for fretted instrument hardware, plus an easy-grip handle with extender. The entire set comes in a durable compact spill-proof latching hard case that fits nicely into your toolbox or guitar case (take it along to your next playing gig).

You won't find it at the hardware megamart, or anywhere else but here at StewMac.

Contents:
6 Phillips bits: 000 • 00 • 0 • 1 • 2 • extra 1
11 Allen bits: .050" • 1/16" • 5/64" • 1/8" • 5/32" • 1.5mm • 2.0mm • 2.5mm • 3.0mm • 3.5mm • 4.0mm
11 flat-blade bits: 0.8mm • 1.2mm • 1.5mm • 1.8mm • 2.0mm • 2.5mm • 3.0mm • 3.5mm • 4.0mm • 5.0mm • extra 3.0mm
Non-slip flat blade bit: 5.0mm flat-blade "capture" bit helps protect small screws and finished surfaces. A StewMac exclusive!

"The capture bit in this set is freakin' awesome! How many times have I had to fix a ding because my old driver slipped."
—Mark Dalton, Huss & Dalton Guitar Co
Adapter for 1/4" sockets: use with your socket set to install tuners and jacks
Mini wire brush: remove corrosion from bridge saddles and more
Awl point: mark starter holes for drill bits
Hardened screw starters: #2 • #3 • #4 • #5; pre-thread screw holes in wood

Handle:
The 4-1/2" easy-grip handle has a rotating cap for fingertip control. It's red, so it won't get lost on a crowded benchtop. The interchangeable steel bits snap easily into the magnetic shaft, and a handy 1-3/8" extender gives extra reach when you need it.

Case:
The latching custom hard case is a mere 5" long, and fits conveniently into a guitar case or gig bag pocket—great for backstage setups and emergency repairs on the road. The case holds the bits snug so they won't spill out. Sizes are marked on the bits, and a handy chart in the case lid helps keep everything organized and easy to identify at a glance.


Ratings & Reviews

Guitar Tech Screwdriver Set

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
5.0
  • Based on 136 Reviews
Displaying 10 of 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Write a review
5.0

This is it!

By
(Customer's Reviews)


Yes, this is it! The screwdriver set I seem to have been looking for all my life for work on electric guitars. Now I pick it up on every electric I work on, and I use it from beginning to end. It fits my hand great, and does everything I need. How can you say more than that?

4.0

Overall quality great except for the screwdriver handle

By
(Customer's Reviews)


I was excited to receive that set. The box is really well made and durable. The bits are great and precise.
Two downsides: 1/ the srewdriver handle in itself is pretty light and poor quality which is really surprising considering the overall good quality of the set Maybe it is durable, but I've only been using for less than a month. 2/ The octagonal part of the bit isn't standard size: you can not use normal spare bits with the screwdriver handle.

For those 2 reasons, I give it a 4/5.

5.0

Excellent Set

By
(Customer's Reviews)


Very high quality, and a great mixture of tools to work on a guitar. I've only had it for one week and I assembled a guitar kit, and I'm surprised how many of the bits I've already used - 4 of the phillips bits, the awl, 3 of the screw starters, 2 flat blade bits and 2 allen bits. Plus the small handle is good for compact spaces and it helps to prevent over-tightening tiny screws.

4.0

Guitar Tech Screwdriver Set

By
(Customer's Reviews)


great kit for the road. a little difficult to get tips out with my calesed fingers, but it has everything i need.i used the center punch, and the screw starters to put a pick guard on my frankinstrat. and used pickguard screws from my schaller kit.

5.0

Perfect little set and maybe a few extras

By
(Customer's Reviews)


Great to have nearby and saves fishing around for the right tool for a quick fix. It never gets picked up to wander off to fix something else in the house. I have gotten a lot of use out of this.

5.0

No more searching

By
(Customer's Reviews)


No more searching and not having the exatly right tool size.
Thanks Stewmac
Ms Ricki Leigh

4.0

Nifty little tool.

By
(Customer's Reviews)


This little kit is a great addition to any guitarist who works on his or her own instrument. It has all the essential bits needed.

5.0

A nice set, probably not for everybody

By
(Customer's Reviews)


You will like this set if:

-You like to have a lot of handy screw heads and mini gadgets contained in one very nifty box, magnetized so that you can literally hold it upside down while it is open without the pieces falling out
- you can appreciate how hard it is to come up with all of these pieces in one package or in many packages for that matter, and if you know that assembling this complete package of tools would be literally impossible because of the unique nature of the tools involved. To assemble even the majority of these bits would require the purchase of several different sets at Home Depot and Radio Shack, and would also require that you machine your own bits that are contained in this kit and not sold anywhere else. And even if you did all that, you still would be left with the problem of storage.

You will not like or be impressed with this set if:
-you focus strictly on the bottom line of the price without consideration of what is truly contained in this tool kit. This is not a kit that you can assemble or even approximately assemble on your own for a lower price. I have many screw bit sets, and there are many bits in the Guitar Tech set that do not exist at Home Depot or Radio Shack. But if you believe they do, you will think this kit is a rip-off
-you simply don't need this many screw bits.

5.0

So Pleased!!!

By
(Customer's Reviews)


I purchased a few guitar tech items from Stew Mac for my son for x-mas! We were both so happy with his screwdriver set and his fret bender. Everything he needs is right here online with Stew Mac. My son swears by this company and would never order or have me order from anywhere else! What you see is exactly what you get and it's always great!

4.0

Great little set!

By
(Customer's Reviews)


This is a very handy set. The bit selection lacks in no way. The magnetic handle is the right size and feel for adjusting small to medium screws. However, even though a number two phillips bit is included, I prefer a much bigger handle to turn neck bolts or strap buttons. I enjoy the socket driver bit for pots or jacks, however, the bit is difficult to remove from a socket since the spring ball fitting is much harder to disconnect than the magnetic handle from the bit. I find that I need a small stick to push the bit out of the socket. Other than these drawbacks, the set is perfect for easy transport and any small adjustments. Worth every penny.

Displaying 10 of 14
1 2 3 4 5 6 7 8 9 10 11 12 13 14


Shown on page 19 of our latest catalog.