Tremolo Routing Templates

4.5
  • 35 Reviews
  • Write a review
Buy ANY 3 save $4.14

Enter quantities below, to see your savings.

Tremolo Routing Templates Traditional Strat tremolo front / rear cavites, set of 2

Traditional Strat tremolo front / rear cavites, set of 2

Item # 1110
In stock, ready to ship!

$13.75

+
Tremolo Routing Templates Floyd Rose or Schaller locking tremolo front / rear cavities, set of 2

Floyd Rose or Schaller locking tremolo front / rear cavities, set of 2

Item # 1118
In stock, ready to ship!

$18.75

+
Tremolo Routing Templates Floyd Rose or Schaller modification for recessed front cavity

Floyd Rose or Schaller modification for recessed front cavity

Item # 1119
Due 2-3 weeks
Notify Me

$19.55

+
 
Total:
Qty:
Scroll to Top

Tremolo Routing Templates

Template set for routing a traditional Fender tremolo and Floyd Rose and Schaller locking tremolo systems.

The most precise routing templates available. Helpful centerlines are laser-etched to aid proper placement, eliminate guesswork and produce cleaner results. Transparent acrylic, 3/16" (4.76mm) thick. Instructions included.

Clear templates for Stratocasters® and clones having standard Fender-style, Floyd Rose® or Schaller locking tremolos with rear-routed spring cavities.

These time-saving templates can be attached to the body with countersunk screws or double-stick tape. We recommend ball-bearing router bits for best results.

The #1119 for recessed tremolo is a template to modify the front cavity to allow extra arm travel for super whammy action. Recessing the tremolo creates extra clearance at the rear of the unit, and increases the range of upward arm movement. The tremolo (and the strings) can be closer to the guitar's face, reducing the need for neck shims.

Use the #1110 Strat templates for proper installation of these tremolos:



Gotoh Traditional Tremolo for Strat


Wilkinson/Gotoh VS-100N Tremolo


Wilkinson/Gotoh VSVG Vintage Tremolo

Use the #1118 Floyd Rose templates for proper installation of these tremolos:



Schaller Locking Tremolo


Golden Age Locking Tremolo


Trade Secrets!

How to install a Strat tremolo and get it right

Erick Coleman has a quick tip that will save you a lot of trouble.

Product Instructions

Router Templates for Traditional Strat Tremolo

Instructions for routing for a traditional Strat-style tremolo bridge.

Router Template Set for Floyd Rose Tremolo

Instructions for using a router template to rout a guitar for a Floyd Rose-style tremolos.

Router Template for Recessed Floyd Rose Tremolo

Instructions for routing a top recess for use with Floyd Rose-style tremolos.

Customer Reviews

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
Write a review
4.5
  • 4.31 average rating from 35 reviews
Sort by
Displaying 3 of 4 1 2 3 4
5.0

Trem Routing Templates for Strat

By
(Customer's Reviews)


I needed a trem template to correctly position the bridge and trem on a strat body I purchased on eBay. After a lot of searching, Stewmac's template was the best choice.

When I received the product I was impressed by it's preciseness.

It has done exactly what it said it would do and much more.

I would recommend this product to anyone.

4.0

Tremolo Routing Template

By
(Customer's Reviews)


Great template but too thin.I've attached them to a 15 mm 'frame' and they work fine. Also I've used them for a hipshot, wilkinson and Gotoh (6 screw)tremolos and you need to be careful with the dimensions to centre it accurately. Works easiest with the 6 screw, I found. Also I found that centring the spring cavity using the 'index' hole method suggested by SM didn't suit me. What I do is route out the top trem slot as deep as I can go then drill a central 1/2" diameter hole with the drill press (not in the corner or touching the sides!)then use a 3/8" end bearing bit from the guitar back and you then have a perfect slot.I then mark out the centre line for the spring cavity I don't try and use the back template to get the spring cavity at right angles to the slot as I found it would always be an irritating mm or so out. Instead I set it up to the guitar back centre line.

5.0

Good Templates

By
(Customer's Reviews)


I haven't used them yet, but have used other stew-mac templates. They are all great, you just need to take your time, and learn how to use them properly. It is also a great idea to make thicker templates out of MDF first, because if you mess up your master templates, you'll have to order new ones.

4.0

Traditional Strat template set

By
(Customer's Reviews)


I used these for the first time for a Wilkinson Tremolo set up. they worked fine for me but like others have commented, they need to be thicker & it would be nice if the centering lines were there that you have to make. Other than that, they do the job. Cellini's custom guitars. Las Vegas,Nv.

5.0

Accurate

By
(Customer's Reviews)


Love these, I have most of the templates, who could ever to it by freehand, really?! Do it right, these are an investment!

3.0

Could be so much better

By
(Customer's Reviews)


Firstly, as many reviewers have said, the material is too thin - I transferred the patterns to some 12mm ply straight away. Secondly it is, indeed, a pain to have to scribe centrelines on when they could easily be done at manufacture.



Still, they seem accurate - just an unnecessary pain to work with.

3.0

...slightly more work than not having them...

By
(Customer's Reviews)


The respective centre lines should be already marked on the templates. Given that they are produced by some computer controlled machine, and the various holes are drilled in line, why on earth are the lines of centre not marked?


Also the template material is far too thin to allow 1/4" cuts with a flush trim bearing equipped cutter. Mine disappeared over 1/2" down the index hole before the bearing engaged.


Fiddling around drawing accurate centre lines and mounting shims etc should not be necessary. The templates should arrive ready to rock!

2.0

Not the best value

By
(Customer's Reviews)


I followed the instructions on a scrap piece of wood and it was wrong. Tried on foam and found the tick marks are on the wrong side of the template. The offset side for the trem arm was on the wrong side. Figured it out, but could have screwed up a lot.

5.0

Very good set

By
(Customer's Reviews)


It is very accurate and it matches the Gotoh tremolo perfectly! Good material.

5.0

excellent

By
(Customer's Reviews)


for accurate and fast works

Displaying 3 of 4
1 2 3 4


Shown on page 68 of our latest catalog.
  • Floyd Rose® is a registered trademark of Floyd Rose Industries.
  • Stratocaster® and Strat® are registered trademarks of Fender Musical Instruments Corporation.