Close

P-90/Mini Humbucker Pickup Routing Template, For body cavity / pickguard cutout

4.5
  • 13 Reviews
  • Write a review

P-90/Mini Humbucker Pickup Routing Template, For body cavity / pickguard cutout

Item # 1083
In stock, ready to ship!

$5.55

+
 
Total:
Qty:
Scroll to Top

P-90/Mini Humbucker Pickup Routing Template, For body cavity / pickguard cutout

About This Item

Transparent acrylic templates to rout for P-90 and mini humbucking pickups.

Laser-cut for precise edges: Our routing templates are laser-cut for smooth edged precision, and centerlines are laser-etched when needed for correct placement.

Our 3/16" (4.76mm) transparent acrylic templates ensure proper router placement on a guitar body or pickguard, eliminate guesswork and produce cleaner results. They can be positioned with countersunk screws or double-stick tape.

Carbide-tipped Ball-bearing Router Bits are preferred for use with our templates.

These single-coil templates are also included in our Pickup/Control Cavity Routing Template Set which has ALL of our Gibson and Fender pickup routing shapes plus control cavities.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.38 average rating from 13 reviews
Sort by
5.0

Can't imagine not using one of these ball bearing templates

By
(Customer's Reviews)


Any one that's used this kind of template knows how well they work and how much time they save.

One thing to be aware of is that these are laser cut which may leave a very tiny lip around one edge or the other. Just use a small, fine toothed file to remove it before using the template.

3.0

P90/Mini Humbucker Routing template

By
(Customer's Reviews)


Hi I don't want to rain on anyones parade, but the pickup body hole is too long for Belcat Mini Humbuckers. The pickup ring screw holes end up inside the body route. It would be ok if the pickup came with long, long screws. But they dont! It does however work if you lay the P90 template on top of a Humbucker Pickgurd template, danger here is not to route a hole in one of your templates, you then use a forsner bit to clear the Humbucker adjusting screw cavity.
PK Melb Aust.

5.0

Stew-Mac quality

By
(Customer's Reviews)


I need that quality Tools for my shop... I always glad about Stew-Mac Tools!

5.0

P-90/Mini Humbucker Pickup Routing Template

By
(Customer's Reviews)


For a p90 rout, this is excellent, had no problems since getting it, all p90's I've fit after using this for the pocket fit comfortably but not tight or loose. As with all plastic/acrylic templates, use it to make a duplicate template out of 3/4 oak or something then use that...

5.0

P90's the ultimate blues pickup

By
(Customer's Reviews)


I can't say enough about the P90's. Back when I was young and fullish, I took the P90's off of my 1964 Gold top Les Paul and installed Humbuckers because that was the thing then. Sadly the Gibson got busted and could not be resored but I found the P90's in my parts drawer and built an unbelievable sounding axe by using this template.

4.0

Do you really want to cut your own?

By
(Customer's Reviews)


Does the trick for sure.

4.0

Tight fit!

By
(Customer's Reviews)


I used this template to do a P90 neck rout on a single-humbucker Ibanez roadstar guitar. Even with a 3/8 bit, the corners are a very tight fit for most any p90 style pickup. The first thing I did was use the template to make a thicker one out of mdf; it's too thin to use on its own. Worked great though!

4.0

corner radius

By
(Customer's Reviews)


These templates have a smaller corner radius than my stock Gibson covers and body cutout....It looks like Gibson used a 1/2" corner radius and these seem to be 3/8"..The smaller radius does fit the stewmac pickup covers , but not the Gibson..I would like to see a 1/2" corner version available also..

3.0

Really thin

By
(Customer's Reviews)


They're good for making thicker templates

5.0

Good Templates

By
(Customer's Reviews)


I haven't used it yet, but have used other stew-mac templates. They are all great, you just need to take your time, and learn how to use them properly. It is also a great idea to make thicker templates out of MDF first, because if you mess up your master templates, you'll have to order new ones.

Showing 10 of 13 Read more reviews >>


StewMac PDF Catalog, page 38 See P-90/Mini Humbucker Pickup Routing Template, For body cavity / pickguard cutout
on page 38 of our StewMac Catalog PDF

12MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.