P-90/Mini Humbucker Pickup Routing Template, For body cavity / pickguard cutout

  • 12 Reviews
  • Write a review

Transparent acrylic templates to rout for P-90 and mini humbucking pickups.

Read more

P-90/Mini Humbucker Pickup Routing Template, For body cavity / pickguard cutout

Item # 1083
In stock, ready to ship!


Total: $0.00
Quantity: 20


Transparent acrylic templates to rout for P-90 and mini humbucking pickups.

Laser-cut for precise edges: Our routing templates are laser-cut for smooth edged precision, and centerlines are laser-etched when needed for correct placement.

Our 3/16" (4.76mm) transparent acrylic templates ensure proper router placement on a guitar body or pickguard, eliminate guesswork and produce cleaner results. They can be positioned with countersunk screws or double-stick tape.

Carbide-tipped Ball-bearing Router Bits are preferred for use with our templates.

These single-coil templates are also included in our Pickup/Control Cavity Routing Template Set which has ALL of our Gibson and Fender pickup routing shapes plus control cavities.

Ratings & Reviews

P-90/Mini Humbucker Pickup Routing Template, For body cavity / pickguard cutout

  • Based on 12 Reviews
Displaying 1 of 2 1 2
Write a review

P90/Mini Humbucker Routing template

By Paul Kelly from Melbourne Australia
(Customer's Reviews) Monday, June 30, 2014

Hi I don't want to rain on anyones parade, but the pickup body hole is too long for Belcat Mini Humbuckers. The pickup ring screw holes end up inside the body route. It would be ok if the pickup came with long, long screws. But they dont! It does however work if you lay the P90 template on top of a Humbucker Pickgurd template, danger here is not to route a hole in one of your templates, you then use a forsner bit to clear the Humbucker adjusting screw cavity.
PK Melb Aust.

Stew-Mac quality

By Alain Meilleur from Quebec, Canada
(Customer's Reviews) Thursday, December 05, 2013

I need that quality Tools for my shop... I always glad about Stew-Mac Tools!

P-90/Mini Humbucker Pickup Routing Template

By DAB Custom Guitars from Pa
(Customer's Reviews) Monday, March 11, 2013

For a p90 rout, this is excellent, had no problems since getting it, all p90's I've fit after using this for the pocket fit comfortably but not tight or loose. As with all plastic/acrylic templates, use it to make a duplicate template out of 3/4 oak or something then use that...

P90's the ultimate blues pickup

By Ken Landis from Gap, PA
(Customer's Reviews) Wednesday, June 27, 2012

I can't say enough about the P90's. Back when I was young and fullish, I took the P90's off of my 1964 Gold top Les Paul and installed Humbuckers because that was the thing then. Sadly the Gibson got busted and could not be resored but I found the P90's in my parts drawer and built an unbelievable sounding axe by using this template.

Do you really want to cut your own?

By Ayers Guitar Co. from Phoenix, AZ
(Customer's Reviews) Friday, February 24, 2012

Does the trick for sure.

Tight fit!

By MikeH from Michigan
(Customer's Reviews) Sunday, January 22, 2012

I used this template to do a P90 neck rout on a single-humbucker Ibanez roadstar guitar. Even with a 3/8 bit, the corners are a very tight fit for most any p90 style pickup. The first thing I did was use the template to make a thicker one out of mdf; it's too thin to use on its own. Worked great though!

corner radius

By jerry wallace from artesia, nm
(Customer's Reviews) Sunday, December 11, 2011

These templates have a smaller corner radius than my stock Gibson covers and body cutout....It looks like Gibson used a 1/2" corner radius and these seem to be 3/8"..The smaller radius does fit the stewmac pickup covers , but not the Gibson..I would like to see a 1/2" corner version available also..

Really thin

By carlton wilkinson from victoria, tx
(Customer's Reviews) Tuesday, September 27, 2011

They're good for making thicker templates

Good Templates

By flyingv from manitoba
(Customer's Reviews) Thursday, August 25, 2011

I haven't used it yet, but have used other stew-mac templates. They are all great, you just need to take your time, and learn how to use them properly. It is also a great idea to make thicker templates out of MDF first, because if you mess up your master templates, you'll have to order new ones.

Pickup template for my LP Custom Deluxe

By Kenny Fox from Perth, Australia
(Customer's Reviews) Saturday, May 07, 2011

I used this on my LP with excellent results. I love the Gibson minis and this also gives me the choice of swapping over to P90s. The template worked well and I've since ordered the full-size 'bucker template too.

Displaying 1 of 2
1 2

Shown on page 36 of our latest catalog.