Carbide Downcut Inlay Router Bits, Set of all 5 sizes

5.0
  • 81 Reviews
  • Write a review

Carbide Downcut Inlay Router Bits, Set of all 5 sizes

Item # 5155
In stock, ready to ship!

List Price $92.75
Set Savings $82.55

+
 
Total:
Qty:
Scroll to Top

Carbide Downcut Inlay Router Bits, Set of all 5 sizes

The best for inlay work and saddle slotting! Solid carbide lasts far longer than steel, and reverse spiral flutes cut downward for cleaner, "no fuzz" edges in routed cavities.

To use our 1/8"-shank bits in your laminate trimmer's 1/4" collet, see our #5246 Adapter Collet.

Length 1-1/2" (38.10mm)
Shank diameter 1/8" (3.18mm)

Use the larger bits for removing wood in the middle of your inlay work, and save the fine bits for the fine details. The fine detail bits are fragile, for routing intricate details only.

Item Primary use Width of cut Depth of cut
5154 For inlay routing and bridge saddle slots 1/8" (0.1250", 3.18mm) 1/2" (0.375", 9.53mm)
5153 For inlay routing and bridge saddle slots 3/32" (0.0938", 2.38mm) 1/4" (0.250", 6.35mm)
5152 For fine detail inlay routing 1/16" (0.0625", 1.59mm) 3/16" (0.188", 4.78mm)
5151 For fine detail inlay routing 3/64" (0.0469", 1.19mm) 1/8" (0.125", 3.18mm)
5150 For fine detail inlay routing 1/32" (0.0313", 0.79mm) 1/8" (0.125", 3.18mm)


Customer Reviews

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
Write a review
5.0
  • 4.89 average rating from 81 reviews
Sort by
Displaying 6 of 9 1 2 3 4 5 6 7 8 9
5.0

Excellent performance

By
(Customer's Reviews)


I only do as much inlay as I have to for an instrument...not my favorite part of building! But these bits created very clean edges. Worth the price.

5.0

Inlay router bit

By
(Customer's Reviews)


I just added a 32nd inlay router bit to my collection. It does a great job. Great quality

5.0

Spiral Downcut Carbide Bit

By
(Customer's Reviews)


I do a lot of inlay and rosette work and these bits just the ticket. Even the smaller bits like the 1/16" bits are very strong and they stay sharp.

5.0

super clean

By
(Customer's Reviews)


I purchased 1/16 and 1/8 bits. They are great for guitar inlay or boxes. Very clean cut, no residue. They are as accurate as your hands and eyes can muster!

4.0

Sharp but stock up on them.

By
(Customer's Reviews)


I use the 1/8 and 3/32 when I fill and reroute saddle slots. The carbide cuts clean and sharp on hard woods like Ebony and Rosewood. I can get around 5 perfect saddle slots out of a bit. On the 6th its goes dull and starts to smoke and rip the wood. I am positive on softer woods you will get much more use out of a bit. Four stars only because of the price.

5.0

American quality

By
(Customer's Reviews)


These router bits are perfect for inlay and other precision routing jobs. Very high quality! Great value too.

5.0

super

By
(Customer's Reviews)


great tool

5.0

Works Great!

By
(Customer's Reviews)


They look expensive, but I tried them anyway and have been very pleased with years of service from them. They stay sharp and work exceptionally-well.

5.0

Downcut best for inlays

By
(Customer's Reviews)


I have been using these cutters for years now, mainly for sound hole inlay work and it is difficult to imagine a better way of doing it. They last for ages but don't just order one as I have found if you have spares they will eventually wear out, if you don't, you'll break one! Highly recommended.

5.0

Carbide Downcut Inlay Router Bits

By
(Customer's Reviews)


That old saying you get what you pay for rings true. Clean and precise with no tear out.

Displaying 6 of 9
1 2 3 4 5 6 7 8 9


Shown on page 32 of our latest catalog.