Carbide Downcut Inlay Router Bits, Set of all 5 sizes

5.0
  • 81 Reviews
  • Write a review

Carbide Downcut Inlay Router Bits, Set of all 5 sizes

Item # 5155
In stock, ready to ship!

List Price $92.75
Your Price $82.55

+
 
Total:
Qty:
Scroll to Top

Carbide Downcut Inlay Router Bits, Set of all 5 sizes

The best for inlay work and saddle slotting! Solid carbide lasts far longer than steel, and reverse spiral flutes cut downward for cleaner, "no fuzz" edges in routed cavities.

To use our 1/8"-shank bits in your laminate trimmer's 1/4" collet, see our #5246 Adapter Collet.

Length 1-1/2" (38.10mm)
Shank diameter 1/8" (3.18mm)

Use the larger bits for removing wood in the middle of your inlay work, and save the fine bits for the fine details. The fine detail bits are fragile, for routing intricate details only.

Item Primary use Width of cut Depth of cut
5154 For inlay routing and bridge saddle slots 1/8" (0.1250", 3.18mm) 1/2" (0.375", 9.53mm)
5153 For inlay routing and bridge saddle slots 3/32" (0.0938", 2.38mm) 1/4" (0.250", 6.35mm)
5152 For fine detail inlay routing 1/16" (0.0625", 1.59mm) 3/16" (0.188", 4.78mm)
5151 For fine detail inlay routing 3/64" (0.0469", 1.19mm) 1/8" (0.125", 3.18mm)
5150 For fine detail inlay routing 1/32" (0.0313", 0.79mm) 1/8" (0.125", 3.18mm)


Customer Reviews

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
Write a review
5.0
  • 4.89 average rating from 81 reviews
Sort by
Displaying 5 of 9 1 2 3 4 5 6 7 8 9
5.0

nice

By
(Customer's Reviews)


Now I can do nice and clean inlay routing with these bits

3.0

Carbide Downcut Inlay Router Bits

By
(Customer's Reviews)


Its great but it can be found in te market for less money...

5.0

No Fuzz!

By
(Customer's Reviews)


These bits perform exactly as advertised. A very clean cut and impressive for routing inlays on fingerboards.

5.0

Just what the Dr ordered...

By
(Customer's Reviews)


I purchased the set not knowing what to expect. The bits are high quality, and amazingly clean-cutting for small inlay bits. I use one of the smaller bits way more than the others and have been impressed with how long it has stayed sharp for the amount of cutting I have done. Normal care for tiny tools is required. You will not be disappointed!

5.0

Exellent!

By
(Customer's Reviews)


These are just Great!!

5.0

Worth the money

By
(Customer's Reviews)


If you're inlaying into an expensive piece of wood, then this is a small price to pay for such a clean cut. I was very impressed with the clean cut it made in Spruce when inlaying narrow purfling in Rosettes.

4.0

good bits

By
(Customer's Reviews)


This are good quality bits, worked good for my custom inlay job. Also used for binding channel which turned out great.

5.0

Inlay Router Bits

By
(Customer's Reviews)


This bit worked very good for cutting the purfling inlay channel. So much better than using a knife.

5.0

Very good bits

By
(Customer's Reviews)


Best bit i've bought for the 'ol dremel to date.

5.0

Excellent Inlay Bits

By
(Customer's Reviews)


They work exacty as advertised. No burrs, only nice clean cuts. Highly recommended.

Displaying 5 of 9
1 2 3 4 5 6 7 8 9


Shown on page 32 of our latest catalog.