Close

Peghole Reamers

5.0
  • 33 Reviews
  • Write a review
Peghole Reamers Standard

Standard

Item # 0344
In stock, ready to ship!

$60.73

Peghole Reamers Large

Large

Item # 0343
In stock, ready to ship!

$131.07

 
Total:
Qty:
Scroll to Top

Peghole Reamers

About This Item

These professional luthier’s reamers aren’t like hardware store versions. One side of our Peghole Reamers is round and smooth. This keeps the reamer centered so the hole stays truly round—essential for tuning pegs!

  • Easy to use
  • Smooth control, no chatter
  • Perfectly round holes

Standard Reamer is most often used for installing guitar tuners, enlarging holes in pickguards and lots of other tasks. The 2-degree taper matches the tuning pegs on full-size violins, violas, banjos and dulcimers.
2-degree Taper: from .200" to .375" (5mm to 9.5mm)
Cutting Length: 5.63" (143mm)

Large Reamer fits double-bass and cello tuning pegs. This big reamer comes in very handy for lots of jobs in the shop.
2-degree Taper: from .312" to .625" (7.92mm to 15.88mm)
Cutting Length: 7.88" (200.15mm)

Made of quality high-speed steel with hollow-ground cutting edges and comfortable wooden handles.

For bridge pins and endpins, see our Bridge Pin Hole Reamers.


Video

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.91 average rating from 33 reviews
Sort by
Displaying 1 of 4
5.0

Peghole Reamers

By

Verified Buyer


I have purchased all three, I was looking for quality I could rely on so I looked west out of Europe and not east. They cut beautifully smooth without almost any pressure to achieve the right depth. The half round part of the reamer ensures no 'chatter'... Oh and thanks for the technical help via the e-mail.

5.0

Peghole Reamer

By

Verified Buyer


The peghole reamer I chose specifically for the Bone Pins with Abalone dots. Their diameter is .220". The reamer worked perfectly; but it takes a good deal of patience and fitting to get the pins set perfectly.

5.0

A must!

By

Verified Buyer


Great tool that goes right along with the peg shaper!! Wouldn't want to do a peg job without it!! Thank you!!

5.0

Well machined, cuts cleanly

By

Verified Buyer


Really nice reamer, not expensive. You could spend a lot more if you wanted to but I fail to see why.

5.0

Very good and easybut jus a tad smalll

By

Verified Buyer


I got this to instal some gototh (i think thats how you spell it) locking tuners and it worked jus perfectly, but it was definitly a incredibly tight squeeze, even after i used the entire reamer, a little bit more to the reamer would have been nice

5.0

Reaming violin peg holes

By

Verified Buyer


This reamer is needed for fitting Wittner geared pegs. EXTREME care is needed!!! 1 turn of the reamer can be 1/2 turn too much.
Test the peg depth when it is pressed in TIGHT, otherwise you can easily go an 1/8" too much.
The reamer is very sharp and requires no effort to turn, so it is very deceiving.

5.0

Excellent tool for any level luthier!

By

Verified Buyer


Using this tool to size new tuners during installation on acoustic guitars. Nice and sharp, maintains concentricity as you size holes without tear out.

5.0

great tool

By

Verified Buyer


I purchased a set of tuners and needed to enlarge the holes and this reamer worked great. The Reamer is easy to use can cut slow or fast - centers itself in the existing hole I purchased the smaller one but really needed the larger size- my future purchase - Delivery was super fast EM

5.0

Works perfectly

By

Verified Buyer


Works perfectly, what else can I say!

5.0

Peghole Reamer

By

Verified Buyer


Works well. Arrived quickly. Got the job done!

Displaying 1 of 4


StewMac PDF Catalog, page 21See Peghole Reamers
on page 21 of our StewMac Digital Catalog