Fret Tang Nipper

4.5
  • 64 Reviews
  • Write a review
Fret Tang Nipper For Narrow Fretwire

For Narrow Fretwire

Item # 1604
In stock, ready to ship!

$60.93

+
Fret Tang Nipper For Medium Fretwire

For Medium Fretwire

Item # 1626
In stock, ready to ship!

$60.93

+
Fret Tang Nipper For Wide Fretwire

For Wide Fretwire

Item # 1649
In stock, ready to ship!

$60.93

+
 
Total:
Qty:
Scroll to Top

Fret Tang Nipper

Undercuts fretwire, fast and easy.
Fret Tang Nipper speeds fret jobs on bound necks, and helps save the lacquer finish at the edges of unbound fretboards.

Bill Collings (of Collings Guitars) inspired this clever tool for undercutting fretwire to fit over neck bindings. Insert the fretwire to the desired depth in the guide notch, squeeze the handle, and the wire is quickly and cleanly undercut—no bending or crimping.

For unbound fingerboards, too: try nipping the fret tang to length before installing the fret. Now you'll only need to cut and file the overhanging crown, and the fret will be less likely to twist and unseat.

A repair shop favorite!
  • Hardened-steel cuts clean and stays sharp
  • Rubber coated handles for a comfortable, non-slip grip
  • Tool is 5.5" long (140mm)

#1604 for narrow fretwire, 0.053" to 0.080" (1.35mm to 2.03mm) wide.
Narrow fretwire is typically used on banjos and mandolins.

#1626 for medium fretwire, 0.075" to 0.095" (1.90mm to 2.41mm) wide.
Medium is the most popular size of guitar fretwire.

#1649 for wide fretwire, 0.100" to 0.120" (2.54mm to 3.05mm) wide.
Wide is found on many modern electric guitars and basses.

Fret Tang Nipper is one of the few StewMac tools that is not recommended for stainless steel frets.


Trade Secrets!

Binding and fretting a Red Diamond mandolin fingerboard

Don MacRostie shows us his methods for fingerboard binding and fretting on a Red Diamond vintage model mandolin.

Customer Reviews

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
Write a review
4.5
  • 4.67 average rating from 64 reviews
Sort by
5.0

A Keeper

By
(Customer's Reviews)


There's usually lots of different tools that can do the same job. This one, in my opinion, is super easy to use and does a fantastic job. It's a keeper!!

5.0

Invaluable

By
(Customer's Reviews)


We've all done it...bought stuff from StewMac and then realised you could just as easily have done without it.

Not the case with this.

If you do bound fingerboards, you will not regret buying this. I estimate that it saves me about 30 minutes on every fret job I do.

5.0

Trouble-free, precise, strong

By
(Customer's Reviews)


Does exactly what it says. Not suitable for soft alloy frets,as it will bend the fretwire edge with its force. Use the fret cutters instead.

Showing 3 of 64 Read more reviews >>


Shown on page 13 of our latest catalog.